거침없이 발전해나가는 IT업계에서 자신만의 자리를 동요하지 않고 단단히 지킬려면Microsoft인증 MB7-514시험은 무조건 패스해야 합니다. 하지만Microsoft인증 MB7-514시험패스는 하늘에 별따기 만큼 어렵습니다. 시험이 영어로 출제되어 공부자료 마련도 좀 힘든편입니다. 여러분들의 고민을 덜어드리기 위해ITExamDump에서는Microsoft인증 MB7-514시험의 영어버전 실제문제를 연구하여 실제시험에 대비한 영어버전Microsoft인증 MB7-514덤프를 출시하였습니다.전문적인 시험대비자료이기에 다른 공부자료는 필요없이ITExamDump에서 제공해드리는Microsoft인증 MB7-514영어버전덤프만 공부하시면 자격증을 딸수 있습니다.
ITExamDump의Microsoft인증 MB7-514시험덤프공부가이드 마련은 현명한 선택입니다. Microsoft인증 MB7-514덤프구매로 시험패스가 쉬워지고 자격증 취득율이 제고되어 공을 많이 들이지 않고서도 성공을 달콤한 열매를 맛볼수 있습니다.
시험 번호/코드: MB7-514
시험 이름: Microsoft (NAV 5.0 C/SIDE Introduction)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 104 문항
업데이트: 2014-04-02
ITExamDump선택으로Microsoft MB7-514시험을 패스하도록 도와드리겠습니다. 우선 우리ITExamDump 사이트에서Microsoft MB7-514관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump에서 제공하는Microsoft MB7-514덤프로 시험 준비하세요. 만약 시험에서 떨어진다면 덤프전액환불을 약속 드립니다.
수많은Microsoft인증 MB7-514시험공부자료중에서ITExamDump의Microsoft인증 MB7-514덤프가 가장 출중한 원인은 무엇일가요? ITExamDump의Microsoft인증 MB7-514덤프는 실제시험문제의 출제방향을 연구하여 IT전문가로 되어있는 덤프제작팀이 만든 최신버전 덤프입니다. ITExamDump의Microsoft인증 MB7-514덤프가 있으면 힘든Microsoft인증 MB7-514시험이 쉬어져서 자격증을 제일 빠른 시간내에 취득할수 있습니다.제일 어려운 시험을 제일 간단한 방법으로 패스하는 방법은ITExamDump의Microsoft인증 MB7-514덤프로 시험준비 공부를 하는것입니다.
우리ITExamDump에는 아주 엘리트 한 전문가들로 구성된 팀입니다 그들은 끈임 없는 연구와 자기자신만의 지식으로 많은 IT관연 덤프자료를 만들어 냄으로 여러분의 꿈을 이루어드립니다, 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는Microsoft MB7-514시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다. ITExamDump덤프들은 모두 보장하는 덤프들이며 여러분은 과감히 ITExamDump의 덤프를 장바구니에 넣으세요. ITExamDump에서 여러분의 꿈을 이루어 드립니다.
만약ITExamDump선택여부에 대하여 망설이게 된다면 여러분은 우선 우리ITExamDump 사이트에서 제공하는Microsoft MB7-514관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. 우리ITExamDump는 여러분이 안전하게Microsoft MB7-514시험을 패스할 수 있는 최고의 선택입니다. ITExamDump을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다.
MB7-514 덤프무료샘플다운로드하기: http://www.itexamdump.com/MB7-514.html
NO.1 In the Microsoft Dynamics NAV application, which of these table types will have the most
trigger code (within a single Functional Area)? In other words, which type of table usually has the
most business rules?
A.Master table
B.Supplemental table
C.Journal table
D.Ledger table
Correct:C
Microsoft기출문제 MB7-514 MB7-514
NO.2 What field property will cause a lookup form to be displayed when the F6 key is pressed?
A.OptionString
B.Lookup
C.TableRelation
D.ValuesAllowed
Correct:C
Microsoft기출문제 MB7-514 MB7-514
NO.3 What is the Master Table for the Cash Management Functional Area in Microsoft Dynamics NAV?
A.Customer
B.G/L Account
C.Cash Account
D.Bank Account
Correct:D
Microsoft기출문제 MB7-514 MB7-514
NO.4 What is the maximum number of fields that can be contained in a secondary key?
A.1
B.2
C.20
D.40
Correct:C
Microsoft기출문제 MB7-514 MB7-514
NO.5 Which are the valid "parts" of a table in Microsoft Dynamics NAV?
A.Data and Legs
B.Data and Properties
C.Data and Description
D.Source and Description
Correct:C
Microsoft기출문제 MB7-514 MB7-514
NO.6 What happens if you set the Editable property of a field in a table to "No"?
A.The field will not be modifiable, whether you use a form or C/AL code.
B.You will not be able to modify the field using C/AL code, but you can still modify it using a form.
C.You will not be able to modify the field using a form, but you can still modify it using C/AL code.
D.The field will not be able to be used on forms.
Correct:C
Microsoft기출문제 MB7-514 MB7-514
NO.7 Into which table are the Journal Entries made for the Sales & Receivables Functional Area?
A.Cust. Journal Line
B.Cash Rec. Journal Line
C.Gen. Journal Line
D.Receivables Journal Line
Correct:C
Microsoft기출문제 MB7-514 MB7-514
NO.8 In a standard Microsoft Dynamics NAV Functional Area, describe the table relationship(s)
between a Master table and the corresponding Ledger table.
A.A field in the Master Table is table-related to the Ledger Table.
B.A field in the Ledger Table is table-related to the Master Table.
C.The Master Table and the Ledger Table each have a field that is table-related to the other.
D.The Ledger Table and the Master Table do not have any fields that are table-related to the other at all.
Correct:B
Microsoft기출문제 MB7-514 MB7-514
NO.9 Using standard navigation in Microsoft Dynamics NAV, pick the three options to access the
ledger form from a card form.
A.Pressing Ctrl+F5, selecting the Ledger Entries menu item, or selecting the Drilldown button on a
flowfield.
B.Pressing Ctrl+F5, selecting the Ledger Entries menu item, or selecting the Lookup button on the tool
bar.
C.Pressing the F5 key, selecting the Ledger Entries menu item, or selecting the Drilldown button on a
flowfield.
D.Pressing the F5 key, selecting the Ledger Entries menu item, or selecting the Lookup button on the tool
bar.
Correct:A
Microsoft기출문제 MB7-514 MB7-514
NO.10 When is it possible to change the name of a field in a table?
A.You must first delete the data from the field in all records in the table before changing the field name.
B.You must first remove all references to the field in other tables, forms, and reports.
C.You can always change the name of a field in a table.
D.You can never change the name of a field in a table.
Correct:C
Microsoft기출문제 MB7-514 MB7-514
NO.11 A SumIndexField is a field that can be attached to a key definition. Which of the following are
accurate characteristics of a SumIndexField?
A.A SumIndexField can be any data type and can be attached to any key in the table.
B.A SumIndexField must be a decimal field and can be attached to any key in the table.
C.A SumIndexField must be a decimal field and can only be attached to the primary key.
D.A SumIndexField can be any data type and can only be attached to the primary key.
Correct:B
Microsoft기출문제 MB7-514 MB7-514
NO.12 Which property is used to define a table relationship?
A.TableConstraint
B.RelateField
C.DataItemLink
D.TableRelation
Correct:D
Microsoft기출문제 MB7-514 MB7-514
NO.13 Which of the following characteristics are not a result of table relationships?
A.Validate data entries.
B.Optimize table records.
C.Perform Lookup in other tables.
D.Automatically propagate changes from one table to other tables.
Correct:B
Microsoft기출문제 MB7-514 MB7-514
NO.14 Key Groups are used to:
A.Allow keys to have a group of fields containing more than one field.
B.Define the group of reports that use a key in a table.
C.Activate and deactivate a seldom used group of keys.
D.Associate a group of keys with a report.
Correct:C
Microsoft기출문제 MB7-514 MB7-514
NO.15 You have a table in which the user makes journal entries. According to Microsoft Dynamics
NAV standards, what type of form is used with this table?
A.List Form
B.Card Form
C.Worksheet Form
D.Tabular Form
Correct:C
Microsoft기출문제 MB7-514 MB7-514
NO.16 When you create a table relation, which characteristic must be true of the table specified by the
table ID?
A.The field ID specified must be part of the primary key.
B.The table must be a master table.
C.The table must not contain any records.
D.The primary key must be a code data type.
Correct:A
Microsoft기출문제 MB7-514 MB7-514
NO.17 Which Data Type is best for storing whole numbers in a table, especially when there are
database size limitations?
A.BLOB
B.Integer
C.Decimal
D.Code
Correct:B
Microsoft기출문제 MB7-514 MB7-514
NO.18 Which of the following Functional Areas has more than one Master Table?
A.General Ledger
B.Fixed Assets
C.Inventory
D.Sales & Receivables
Correct:B
Microsoft기출문제 MB7-514 MB7-514
NO.19 A table description contains the following:
A.Properties, Triggers, Fields, and Keys.
B.Names, Fields, Keys, and Forms.
C.Properties, Data, Fields, and Keys.
D.Data and Keys.
Correct:A
Microsoft기출문제 MB7-514 MB7-514
NO.20 Which of the following best describes Tab Controls?
A.Tab controls can only contain one tab, named General.
B.Tab controls must contain a tab named General. Any additional names are specified using the
NewTabName property.
C.Tab controls can contain multiple tabs; the names of which are specified using the MultipleTab property.
D.Tab controls can contain multiple tabs; the names of which are specified using the PageNames property.
Correct:D
Microsoft기출문제 MB7-514 MB7-514
ITexamdump의 덤프의 VCE테스트프로그램과 HP3-C29덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 MB6-889시험에 대비한 고품질 덤프와 70-332시험 최신버전덤프를 제공해드립니다. 최고품질 1z0-822시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기