많은 사이트에서Microsoft 인증070-506-VB 인증시험대비자료를 제공하고 있습니다. 그중에서 ITExamDump를 선택한 분들은Microsoft 인증070-506-VB시험통과의 지름길에 오른것과 같습니다. ITExamDump는 시험에서 불합격성적표를 받으시면 덤프비용을 환불하는 서
만약 여러분은Microsoft 070-506-VB인증시험취득으로 이 치열한 IT업계경쟁 속에서 자기만의 자리를 잡고, 스펙을 쌓고, 전문적인 지식을 높이고 싶으십니까? 하지만Microsoft 070-506-VB패스는 쉬운 일은 아닙니다.Microsoft 070-506-VB패스는 여러분이 IT업계에 한발작 더 가까워졌다는 뜻이죠. 하지만 이렇게 중요한 시험이라고 많은 시간과 정력을 낭비할필요는 없습니다. ITExamDump의 완벽한 자료만으로도 가능합니다. ITExamDump의 덤프들은 모두 전문적으로 IT관련인증시험에 대하여 연구하여 만들어진것이기 때문입니다.
ITExamDump의 도움을 받겠다고 하면 우리는 무조건 최선을 다하여 한번에 패스하도록 도와드릴 것입니다. 또한 일년무료 업뎃서비스를 제공합니다. 중요한 건 덤프가 갱신이 되면 또 갱신버전도 여러분 메일로 보내드립니다. 망설이지 마십시오. 우리를 선택하는 동시에 여러분은070-506-VB시험고민을 하시지 않으셔도 됩니다.빨리 우리덤프를 장바구니에 넣으시죠.
ITExamDump의 Microsoft인증 070-506-VB덤프를 구매하여 공부한지 일주일만에 바로 시험을 보았는데 고득점으로 시험을 패스했습니다.이는ITExamDump의 Microsoft인증 070-506-VB덤프를 구매한 분이 전해온 희소식입니다. 다른 자료 필요없이 단지 저희Microsoft인증 070-506-VB덤프로 이렇게 어려운 시험을 일주일만에 패스하고 자격증을 취득할수 있습니다.덤프가격도 다른 사이트보다 만만하여 부담없이 덤프마련이 가능합니다.구매전 무료샘플을 다운받아 보시면 믿음을 느낄것입니다.
Microsoft 070-506-VB인증시험은 현재IT업계에서 아주 인기 있는 시험입니다.많은 IT인사들이 관연 자격증을 취득하려고 노력하고 있습니다.Microsoft 070-506-VB인증시험에 대한 열기는 식지 않습니다.Microsoft 070-506-VB자격증은 여러분의 사회생활에 많은 도움이 될 것이며 연봉상승 등 생활보장에 업그레이드 될 것입니다.
ITExamDump의 Microsoft인증070-506-VB시험대비덤프는 실제시험문제 출제경향을 충분히 연구하여 제작한 완벽한 결과물입니다.실제시험문제가 바뀌면 덤프를 제일 빠른 시일내에 업데이트하도록 하기에 한번 구매하시면 1년동안 항상 가장 최신의Microsoft인증070-506-VB시험덤프자료를 제공받을수 있습니다.
ITExamDump 의 Microsoft인증 070-506-VB덤프는Microsoft인증 070-506-VB시험에 도전장을 던진 분들이 신뢰할수 있는 든든한 길잡이 입니다. Microsoft인증 070-506-VB시험대비 덤프뿐만아니라 다른 IT인증시험에 대비한 덤프자료도 적중율이 끝내줍니다. Microsoft인증 070-506-VB시험이나 다른 IT인증자격증시험이나ITExamDump제품을 사용해보세요.투자한 덤프비용보다 훨씬 큰 이득을 보실수 있을것입니다.
시험 번호/코드: 070-506-VB
시험 이름: Microsoft (TS: Microsoft Silverlight 4, Development)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 75 문항
업데이트: 2013-12-02
070-506-VB 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-506-VB.html
NO.1 You are developing a Silverlight 4 application.
The application defines the following three event handlers. (Line numbers are included for reference only.)
01 Private Sub HandleCheck(sender As Object, e As RoutedEventArgs)
02 MessageBox.Show("Checked")
03 End Sub
04
05 Private Sub HandleUnchecked(sender As Object, e As RoutedEventArgs)
06 MessageBox.Show("Unchecked")
07 End Sub
08
09 Private Sub HandleThirdState(sender As Object, e As RoutedEventArgs)
10 MessageBox.Show("Indeterminate")
11 End Sub
You need to allow a check box that can be selected, cleared, or set to Indeterminate. You also need to
ensure that the event handlers are invoked when the user changes the state of the control.
Which XAML fragment should you use?
A. <CheckBox x:Name="cb2" Content="Three State CheckBox"
IsChecked="True" Checked="HandleCheck"
Indeterminate="HandleUnchecked" Unchecked="HandleUnchecked" />
B. <CheckBox x:Name="cb2" Content="Three State CheckBox"
IsThreeState="True" Checked="HandleCheck"
Indeterminate="HandleThirdState" Unchecked="HandleUnchecked" />
C. <CheckBox x:Name="cb2" Content="Three State CheckBox"
IsHitTestVisible="True" Checked="HandleCheck"
Indeterminate="HandleThirdState" Unchecked="HandleUnchecked" />
D. <CheckBox x:Name="cb2" Content="Three State CheckBox"
IsEnabled="True" Checked="HandleCheck"
Indeterminate="HandleUnchecked" Unchecked="HandleUnchecked" />
Answer: B
Microsoft 070-506-VB dumps 070-506-VB pdf 070-506-VB
NO.2 You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You add a BackgroundWorker object named worker to the application.
You add the following code segment. (Line numbers are included for reference only.)
01 Public Sub New()
02 InitializeComponent()
03 worker.WorkerSupportsCancellation = True
04 AddHandler worker.DoWork, New DoWorkEventHandler(AddressOf worker_DoWork)
05 AddHandler worker.RunWorkerCompleted, New RunWorkerCompletedEventHandler(AddressOf
worker_Completed)
06 End Sub
07 Private Sub worker_DoWork(sender As Object, e As DoWorkEventArgs)
08 For i As Integer = 0 To 99
09 InvokeLongRunningProcessStep()
10 Next
11 End Sub
You need to ensure that worker can be properly canceled.
Which code segment should you use to replace line 09?
A. Dim cancel = TryCast(sender, BackgroundWorker).CancellationPending
If cancel Then
TryCast(sender, BackgroundWorker).CancelAsync()
Else
InvokeLongRunningProcessStep()
End If
B. Dim cancel = TryCast(sender, BackgroundWorker).CancellationPending
If cancel Then
e.Cancel = True
Else
InvokeLongRunningProcessStep()
End If
C. Dim cancel = e.Cancel
If cancel Then
TryCast(sender, BackgroundWorker).CancelAsync()
Else
InvokeLongRunningProcessStep()
End If
D. Dim cancel = e.Cancel
If cancel Then
e.Cancel = True
Else
InvokeLongRunningProcessStep()
End If
Answer: B
Microsoft 070-506-VB 070-506-VB pdf 070-506-VB덤프 070-506-VB dump
NO.3 You are developing a Silverlight 4 application.
You have a collection named ColPeople of the List<Person> type.
You define the Person class according to the following code segment.
Public Class Person
Public Property Name() As String
Public Property Description() As String
Public Property Gender() As String
Public Property Age() As Integer
Public Property Weight() as Integer
End Class
You need to bind ColPeople to a ComboBox so that only the Name property is displayed.
Which XAML fragment should you use?
A. <ComboBox DataContext="{Binding ColPeople}" ItemsSource="{Binding ColPeople}"
DisplayMemberPath="Name" />
B. <ComboBox DataContext="{Binding Person}" ItemsSource="{Binding Person}"
DisplayMemberPath="ColPeople" />
C. <ComboBox DataContext="{Binding ColPeople}" DisplayMemberPath="Name" />
D. <ComboBox DataContext="{Binding Person}" />
Answer: A
Microsoft덤프 070-506-VB 070-506-VB자격증 070-506-VB dump 070-506-VB 070-506-VB
NO.4 You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4. The
application has a TextBox control named txtName.
You need to handle the event when txtName has the focus and the user presses the F2 key.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose
two.)
A. AddHandler txtName.KeyDown, New KeyEventHandler ( AddressOf txtName_KeyDown)
B. AddHandler txtName.LostFocus, New RoutedEventHandler(AddressOf txtName_LostFocus)
C. AddHandler txtName.TextChanged, New TextChangedEventHandler(AddressOf
txtName_TextChanged)
D. Private Sub txtName_TextChanged(sender As Object, e As TextChangedEventArgs)
'Custom logic
If DirectCast(e.OriginalSource, Key) = Key.F2 Then
End If
End Sub
E. Private Sub txtName_KeyDown(sender As Object, e As KeyEventArgs)
'Custom logic
If e.Key = Key.F2 Then
End If
End Sub
F. Private Sub txtName_LostFocus(sender As Object, e As RoutedEventArgs)
'Custom logic
If DirectCast(e.OriginalSource, Key) = Key.F2 Then
End If
End Sub
Answer: AE
Microsoft자격증 070-506-VB 070-506-VB덤프 070-506-VB자격증
NO.5 You are developing a Silverlight 4 application.
You define the visual behavior of a custom control in the ControlTemplate by defining a VisualState object
named Selected.
You need to change the visual state of the custom control to the Selected state.
Which code segment or XAML fragment should you use?
A. VisualStateManager.GoToState(Me, "Selected", True)
B. <VisualTransition To="Selected">
<Storyboard>
...
</Storyboard>
</VisualTransition>
C. <VisualTransition From="Selected">
<Storyboard>
...
</Storyboard>
</VisualTransition>
D. Public Shared ReadOnly SelectedProperty As DependencyProperty =
DependencyProperty.Register("Selected", GetType(VisualState), GetType(MyControl), Nothing)
Public Property Selected As VisualState
Get
Return GetValue(SelectedProperty)
End Get
Set(ByVal value As VisualState)
SetValue(SelectedProperty, value)
End Set
End Property
Answer: A
Microsoft 070-506-VB기출문제 070-506-VB시험문제 070-506-VB dump
NO.6 You are developing a Silverlight 4 application.
The application contains an XAML page that defines the following Grid control.
<Grid Name="gridBody" >
<Grid.RowDefinitions>
<RowDefinition />
<RowDefinition />
</Grid.RowDefinitions>
<TextBlock Text="Employee Info" />
<TextBlock Text="Please enter employee info" Grid.Row="1" Height="20" VerticalAlignment="Top" />
<TextBox x:Name="EmpInfo" Grid.Row="1" Margin="0,25,0,0" TextWrapping="Wrap" />
...
</Grid>
The code-behind file for myPage.xaml contains the following code segment. (Line numbers are included
for reference only.)
01 Public Sub New()
02 InitializeComponent()
03
04 Dim control As UserControl = New MyCustomControl()
05
06 End Sub
You need to replace the contents of the second row of gridBody with a user control of the
MyCustomControl type.
Which code segment should you insert at line 05?
A. gridBody.Children.Insert(1, control)
B. gridBody.RowDefinitions.Remove(gridBody.RowDefinitions(1))
gridBody.Children.Insert(1, control)
C. gridBody.RowDefinitions.Remove(gridBody.RowDefinitions(1))
gridBody.Children.Insert(1, control)
gridBody.Children.Clear()
Grid.SetRow(control, 1)
gridBody.Children.Add(control)
D. gridBody.RowDefinitions.Remove(gridBody.RowDefinitions(1))
gridBody.Children.Insert(1, control)
gridBody.Children.Clear()
Grid.SetRow(control, 1)
gridBody.Children.Add(control)
Answer: D
Microsoft dumps 070-506-VB 070-506-VB자료
NO.7 Private Sub worker_ProgressChanged(sender As Object, e As ProgressChangedEventArgs)
NO.8 You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You create a Windows Communication Foundation (WCF) Data Service. You add a service reference to
the WCF Data Service named NorthwindEntities in the Silverlight application. You also add a
CollectionViewSource object named ordersViewSource in the Silverlight application.
You add the following code segment. (Line numbers are included for reference only.)
01 Sub getOrders_Click(ByVal sender As Object, ByVal e As RoutedEventArgs)
02 Dim context As New NorthwindEntities()
03
04 Dim query = From order In context.Orders Select order
05
06 End Sub
You need to retrieve the Orders data from the WCF Data Service and bind the data to the
ordersViewSource object.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose
two.)
A. Add the following code segment at line 03.
Dim obsCollection = New ObservableCollection(Of Order)
B. Add the following code segment at line 03.
Dim dsOrders As New DataServiceCollection(Of Order)
AddHandler dsOrders.LoadCompleted, New EventHandler(Of LoadCompletedEventArgs)(Sub(dsc, args)
ordersViewSource.Source = dsOrders
End Sub)
C. Add the following code segment at line 05.
dsOrders.LoadAsync(query)
D. Add the following code segment at line 05.
dsOrders.Load(query)
E. Add the following code segment at line 05.
query.ToList().ForEach(Sub(o) obsCollection.Add(o))
ordersViewSource.Source = obsCollection
Answer: BC
Microsoft자격증 070-506-VB 070-506-VB 070-506-VB 070-506-VB시험문제 070-506-VB최신덤프
NO.9 You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You add a BackgroundWorker object named worker to the application. You also add a CheckBox control
named checkBox and a TextBlock control named statusTextBlock.
You add the following code segment. (Line numbers are included for reference only.)
01 Public Sub New()
02 InitializeComponent()
03 worker.WorkerReportsProgress = True
04 AddHandler worker.DoWork, New DoWorkEventHandler(AddressOf worker_DoWork)
05 AddHandler worker.ProgressChanged, New ProgressChangedEventHandler(AddressOf
worker_ProgressChanged)
06 End Sub
07 Private Sub worker_DoWork(sender As Object, e As DoWorkEventArgs)
08 For i As Integer = 0 To 99
09 Dim isChecked As Boolean = checkBox.IsChecked.HasValue AndAlso
checkBox.IsChecked.Value
10 ExecuteLongRunningProcessStep(isChecked)
11 worker.ReportProgress(i)
12 Next
NO.10 End Sub
You attempt to run the application. You receive the following error message:
"Invalid cross-thread access."
You need to ensure that worker executes successfully.
What should you do?
A. Replace line 09 with the following code segment.
Dim b = CType(checkBox.GetValue(CheckBox.IsCheckedProperty), System.Nullable(Of Boolean))
Dim isChecked As Boolean = b.HasValue AndAlso b.Value
B. Replace line 09 with the following code segment.
Dim isChecked As Boolean = False
Dispatcher.BeginInvoke(Function()
isChecked = checkBox.IsChecked.HasValue AndAlso checkBox.IsChecked.Value
End Function)
C. Replace line 15 with the following code segment.
statusTextBlock.SetValue(TextBlock.TextProperty, (e.ProgressPercentage + "%"))
D. Replace line 15 with the following code segment.
Dispatcher.BeginInvoke(Function()
statusTextBlock.Text = e.ProgressPercentage + "%"
End Function)
Answer: B
Microsoft자격증 070-506-VB 070-506-VB
13. You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You add the following code segment. (Line numbers are included for reference only.)
01 Public Class MyControl Inherits Control
02
03 Public Property Title() As String
04 Get
05 Return DirectCast(GetValue(TitleProperty), String)
06 End Get
07 Set
08 SetValue(TitleProperty, value)
09 End Set
10 End Property
11 End Class
You need to create a dependency property named TitleProperty that allows developers to set the Title.
You also need to ensure that the default value of the TitleProperty dependency property is set to Untitled.
Which code segment you add at line 02?
A. Public Shared ReadOnly TitleProperty As DependencyProperty =
DependencyProperty.Register("Untitled", GetType(System.String),
GetType(MyControl), Nothing)
B. Public Shared ReadOnly TitleProperty As DependencyProperty =
DependencyProperty.Register("Untitled", GetType(System.String),
GetType(MyControl), New PropertyMetadata("Title"))
C. Public Shared ReadOnly TitleProperty As DependencyProperty =
DependencyProperty.Register("Title", GetType(System.String),
GetType(MyControl), New PropertyMetadata("Untitled"))
D. Public Shared ReadOnly TitleProperty As DependencyProperty =
DependencyProperty.Register("Title", GetType(String),
GetType(MyControl), New PropertyMetadata(New PropertyChangedCallback(Sub(depObj, args)
depObj.SetValue(MyControl.TitleProperty, "Untitled")
End Sub)))
Answer: C
Microsoft 070-506-VB pdf 070-506-VB 070-506-VB자격증 070-506-VB덤프
14. You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You create a control named MyControl in the application. Each instance of the control contains a list of
FrameworkElement objects.
You add the following code segment. (Line numbers are included for reference only.)
01 Public Class MyControl
02 Inherits Control
03
04 Public ReadOnly Property ChildElements As List(Of FrameworkElement)
05 Get
06 Return DirectCast(GetValue(MyControl.ChildElementsProperty), List(Of FrameworkElement))
07 End Get
08 End Property
09 Public Sub New()
10
11 End Sub
12
13 Shared Sub New()
14
15 End Sub
16 End Class
You need to create the ChildElementsProperty dependency property. You also need to initialize the
property by using an empty list of FrameworkElement objects.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose
two.)
A. Add the following code segment at line 03.
Public Shared ReadOnly ChildElementsProperty As DependencyProperty =
DependencyProperty.Register("ChildElements", GetType(List(Of
FrameworkElement)), GetType(MyControl), New PropertyMetadata(New
List(Of FrameworkElement)()))
B. Add the following code segment at line 03.
Public Shared ReadOnly ChildElementsProperty As DependencyProperty =
DependencyProperty.Register("ChildElements", GetType(List(Of
FrameworkElement)), GetType(MyControl), New
PropertyMetadata(Nothing))
C. Add the following code segment at line 10.
SetValue(MyControl.ChildElementsProperty, New List(Of
FrameworkElement)())
D. Add the following code segment at line 14.
ChildElementsProperty = DependencyProperty.Register("ChildElements",
GetType(List(Of FrameworkElement)), GetType(MyControl), New
PropertyMetadata(New List(Of FrameworkElement)()))
Answer: BC
Microsoft 070-506-VB 070-506-VB
15. You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You add the following code segment. (Line numbers are included for reference only.)
01 Dim outerCanvas = New Canvas()
02 Dim innerCanvas = New Canvas()
03 innerCanvas.Width = 200
04 innerCanvas.Height = 200
05 outerCanvas.Children.Add(innerCanvas)
06
You need to set the distance between the left of the innerCanvas element and the left of the outerCanvas
element to 150 pixels.
Which code segment should you add at line 06?
A. outerCanvas.Margin = New Thickness(0.0, 150.0, 0.0, 0.0)
B. innerCanvas.Margin = new Thickness(0.0, 150.0, 0.0, 0.0)
C. outerCanvas.SetValue(Canvas.LeftProperty, 150.0)
D. innerCanvas.SetValue(Canvas.LeftProperty, 150.0)
Answer: D
Microsoft 070-506-VB dump 070-506-VB 070-506-VB시험문제 070-506-VB
NO.11 You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You create a new user control in the application. You add the following XAML fragment to the control.
<StackPanel KeyDown="App_KeyDown" Orientation="Vertical">
<TextBox x:Name="firstName" />
<TextBox x:Name="lastName" />
<TextBox x:Name="address" />
</StackPanel>
You add the following code segment in the code-behind file of the control. (Line numbers are included for
reference only.)
01 Private Sub App_KeyDown(ByVal sender As Object, ByVal e As KeyEventArgs)
02
03 End Sub
04
05 Private Sub FirstAndLastNameKeyDown()
06 '...
07 End Sub
You need to ensure that the FirstAndLastNameKeyDown method is invoked when a key is pressed while
the focus is on the firstName or lastName TextBox controls. You also need to ensure that the default
behavior of the controls remains unchanged.
Which code segment should you add at line 02?
A. If ((CType(sender,FrameworkElement).Name = "firstName") _
OrElse (CType(sender,FrameworkElement).Name = "lastName")) Then
FirstAndLastNameKeyDown
End If
e.Handled = false
B. If ((CType(sender,FrameworkElement).Name = "firstName") _
OrElse (CType(sender,FrameworkElement).Name = "lastName")) Then
FirstAndLastNameKeyDown
End If
e.Handled = true
C. If ((CType(e.OriginalSource,FrameworkElement).Name = "firstName") _
OrElse (CType(e.OriginalSource,FrameworkElement).Name = "lastName")) Then
FirstAndLastNameKeyDown
End If
e.Handled = false
D. If ((CType(e.OriginalSource,FrameworkElement).Name = "firstName") _
OrElse (CType(e.OriginalSource,FrameworkElement).Name = "lastName")) Then
FirstAndLastNameKeyDown
End If
e.Handled = true
Answer: C
Microsoft시험문제 070-506-VB 070-506-VB 070-506-VB덤프
NO.12 End Sub
NO.13 You are developing a Silverlight 4 application.
The application defines the following XAML fragment. (Line numbers are included for reference only.)
01 <ComboBox>
02 <ComboBoxItem Content="Item 1" />
03 <ComboBoxItem Content="Item 2" />
04 <ComboBoxItem Content="Item 3" />
05 </ComboBox>
The code-behind file contains the following code segment. (Line numbers are included for reference only.)
06 Private Sub PrintText(sender As Object, args As SelectionChangedEventArgs)
07
08 MessageBox.Show("You selected " + cbi.Content.ToString() + ".")
09 End Sub
You need to ensure that when the user selects an item in a ComboBox control, the content of the item is
displayed.
What should you do?
A. Replace the following XAML fragment at line 01.
<ComboBox SelectionChanged="PrintText">
Add the following code segment at line 07.
Dim cbi As ComboBoxItem = TryCast(TryCast(sender, ComboBox).SelectedItem, ComboBoxItem)
B. Replace the following XAML fragment at line 01.
<ComboBox SelectionChanged="PrintText">
Add the following code segment at line 07.
Dim cbi As ComboBoxItem = TryCast(TryCast(sender, ComboBox).SelectedIndex, ComboBoxItem)
C. Replace the following XAML fragment at line 01.
<ComboBox DropDownClosed="PrintText">
Add the following code segment at line 07.
Dim cbi As ComboBoxItem = TryCast(TryCast(sender, ComboBox).SelectedItem, ComboBoxItem)
D. Replace the following XAML fragment at line 01.
<ComboBox DropDownClosed="PrintText">
Add the following code segment at line 07.
Dim cbi As ComboBoxItem = TryCast(TryCast(sender, ComboBox).SelectedIndex, ComboBoxItem)
Answer: A
Microsoft자격증 070-506-VB자격증 070-506-VB 070-506-VB
NO.14 statusTextBlock.Text = Convert.ToString(e.ProgressPercentage) & "%"
NO.15 You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
The application contains the following XAML fragment.
<TextBlock x:Name="QuoteOfTheDay" />
The application calls a Windows Communication Foundation (WCF) service named MyService that
returns the quote of the day and assigns it to the QuoteOfTheDay TextBlock.
The application contains the following code segment. (Line numbers are included for reference only.)
01 Dim client = New MyService.MyServiceClient()
02 AddHandler client.GetQuoteOfTheDayCompleted, Sub(s, args) QuoteOfTheDay.Text = args.Result
03 client.GetQuoteOfTheDayAsync()
You need to handle errors that might occur as a result of the service call. You also need to provide a
default value of "Unavailable" when an error occurs.
Which code segment should you replace at lines 02 and 03?
A. QuoteOfTheDay.Text = "Unavailable"
AddHandler client.GetQuoteOfTheDayCompleted, Sub(s, args)
QuoteOfTheDay.Text = args.Result
End Sub
client.GetQuoteOfTheDayAsync()
B. AddHandler client.GetQuoteOfTheDayCompleted,Sub(s, args)
If args.Result IsNot Nothing Then
QuoteOfTheDay.Text = args.Result
Else
QuoteOfTheDay.Text = "Unavailable"
End If
End Sub
client.GetQuoteOfTheDayAsync()
C. AddHandler client.GetQuoteOfTheDayCompleted, Sub(s, args)
QuoteOfTheDay.Text = args.Result
End Sub
Try
client.GetQuoteOfTheDayAsync()
Catch ex As Exception
' TODO: handle exception
QuoteOfTheDay.Text = "Unavailable"
End Try
D. AddHandler client.GetQuoteOfTheDayCompleted, Sub(s, args)
If args.[Error] Is Nothing Then
QuoteOfTheDay.Text = args.Result
Else
' TODO: handle error
QuoteOfTheDay.Text = "Unavailable"
End If
End Sub
client.GetQuoteOfTheDayAsync()
Answer: D
Microsoft 070-506-VB pdf 070-506-VB시험문제 070-506-VB 070-506-VB 070-506-VB
NO.16 You are developing a Silverlight 4 application.
You define an Invoice object according to the following code segment.
Public Class Invoice
Public Property InvoiceId() As Integer
Public Property Amount() As Double
Public Property Supplier() As Supplier
Public Property InvoiceDate() As DateTime
Public Property PayDate() As DateTime
Public Property InvoiceDescription() As String
End Class
You need to display a list of invoices that have the following properties displayed on each line: InvoiceId,
Amount, and InvoiceDate.
Which XAML fragment should you use?
A. <ListBox x:Name="InvoiceListBox">
<StackPanel Orientation="Horizontal">
<TextBlock Text="{Binding Path=InvoiceId}" />
<TextBlock Text="{Binding Path=Amount}" />
<TextBlock Text="{Binding Path=InvoiceDate}" />
</StackPanel>
</ListBox>
B. <ListBox x:Name="InvoiceListBox">
<StackPanel Orientation="Horizontal">
<ListBoxItem>
<TextBlock Text="{Binding Path=InvoiceId}" />
</ListBoxItem>
<ListBoxItem>
<TextBlock Text="{Binding Path=Amount}" />
</ListBoxItem>
<ListBoxItem>
<TextBlock Text="{Binding Path=InvoiceDate}" />
</ListBoxItem>
</StackPanel>
</ListBox>
C. <ListBox x:Name="InvoiceListBox">
<ListBox.Items>
<ItemsPanelTemplate>
<StackPanel Orientation="Horizontal">
<TextBlock Text="{Binding Path=InvoiceId}" />
<TextBlock Text="{Binding Path=Amount}" />
<TextBlock Text="{Binding Path=InvoiceDate}" />
</StackPanel>
</ItemsPanelTemplate>
</ListBox.Items>
</ListBox>
D. <ListBox x:Name="InvoiceListBox">
<ListBox.ItemTemplate>
<DataTemplate>
<StackPanel Orientation="Horizontal">
<TextBlock Text="{Binding Path=InvoiceId}" />
<TextBlock Text="{Binding Path=Amount}" />
<TextBlock Text="{Binding Path=InvoiceDate}" />
</StackPanel>
</DataTemplate>
</ListBox.ItemTemplate>
</ListBox>
Answer: D
Microsoft dump 070-506-VB인증 070-506-VB
ITexamdump의 00M-670덤프의 VCE테스트프로그램과 1Y0-200덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 MB3-701시험에 대비한 고품질 덤프와 HP2-N42시험 최신버전덤프를 제공해드립니다. 최고품질 JN0-690시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기