ITExamDump의 IBM 000-470덤프를 구매하기전 우선 pdf버전 덤프샘플을 다운받아 덤프문제를 공부해보시면ITExamDump덤프품질에 신뢰가 느껴질것입니다. ITExamDump의 IBM 000-470덤프가 고객님의 시험패스테 조금이나마 도움이 되신다면 행복으로 느끼겠습니다.
ITExamDump의 IBM인증 000-470덤프를 구매하여 공부한지 일주일만에 바로 시험을 보았는데 고득점으로 시험을 패스했습니다.이는ITExamDump의 IBM인증 000-470덤프를 구매한 분이 전해온 희소식입니다. 다른 자료 필요없이 단지 저희IBM인증 000-470덤프로 이렇게 어려운 시험을 일주일만에 패스하고 자격증을 취득할수 있습니다.덤프가격도 다른 사이트보다 만만하여 부담없이 덤프마련이 가능합니다.구매전 무료샘플을 다운받아 보시면 믿음을 느낄것입니다.
ITExamDump연구한 전문IBM 000-470인증시험을 겨냥한 덤프가 아주 많은 인기를 누리고 있습니다. ITExamDump제공되는 자료는 지식을 장악할 수 있는 반면 많은 경험도 쌓을 수 있습니다. ITExamDump는 많은 IT인사들의 요구를 만족시켜드릴 수 있는 사이트입니다. 비록IBM 000-470인증시험은 어렵지만 우리ITExamDump의 문제집으로 가이드 하면 여러분은 아주 자신만만하게 응시하실 수 있습니다. 안심하시고 우리 ITExamDump가 제공하는 알맞춤 문제집을 사용하시고 완벽한IBM 000-470인증시험 준비를 하세요.
시험 번호/코드: 000-470
시험 이름: IBM (IBM Unica Campaign V8.5)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 108 문항
업데이트: 2013-12-08
ITExamDump는 여러분이 원하는 최신 최고버전의 IBM 인증000-470덤프를 제공합니다. IBM 인증000-470덤프는 IT업계전문가들이 끊임없는 노력과 지금까지의 경험으로 연구하여 만들어낸 제일 정확한 시험문제와 답들로 만들어졌습니다. ITExamDump의 문제집으로 여러분은 충분히 안전이 시험을 패스하실 수 있습니다. 우리 ITExamDump 의 문제집들은 모두 100%합격율을 자랑하며 ITExamDump의 제품을 구매하였다면 IBM 인증000-470시험패스와 자격증 취득은 근심하지 않으셔도 됩니다. 여러분은 IT업계에서 또 한층 업그레이드 될것입니다.
여러분은 아직도IBM 000-470인증시험의 난이도에 대하여 고민 중입니까? 아직도IBM 000-470시험 때문에 밤잠도 제대로 이루지 못하면서 시험공부를 하고 있습니까? 빨리빨리ITExamDump를 선택하여 주세요. 그럼 빠른 시일내에 많은 공을 들이지 않고 여러분으 꿈을 이룰수 있습니다.
어떻게IBM인증000-470시험을 패스하느냐 에는 여러 가지 방법이 있습니다. 하지만 여러분의 선택에 따라 보장도 또한 틀립니다. 우리ITExamDump 에서는 아주 완벽한 학습가이드를 제공하며,IBM인증000-470시험은 아주 간편하게 패스하실 수 있습니다. ITExamDump에서 제공되는 문제와 답은 모두 실제IBM인증000-470시험에서나 오는 문제들입니다. 일종의 기출문제입니다.때문에 우리ITExamDump덤프의 보장 도와 정확도는 안심하셔도 좋습니다.무조건IBM인증000-470시험을 통과하게 만듭니다.우리ITExamDump또한 끈임 없는 덤프갱신으로 페펙트한IBM인증000-470시험자료를 여러분들한테 선사하겠습니다.
ITExamDump는IBM인증000-470시험에 대하여 가이드를 해줄 수 있는 사이트입니다. ITExamDump는 여러분의 전업지식을 업그레이드시켜줄 수 잇고 또한 한번에IBM인증000-470시험을 패스하도록 도와주는 사이트입니다. ITExamDump제공하는 자료들은 모두 it업계전문가들이 자신의 지식과 끈임없은 경헌등으로 만들어낸 퍼펙트 자료들입니다. 품질은 정확도 모두 보장되는 문제집입니다.IBM인증000-470시험은 여러분이 it지식을 한층 업할수 잇는 시험이며 우리 또한 일년무료 업데이트서비스를 제공합니다.
000-470 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-470.html
NO.1 Within a flowchart a user wants to switch audiences from the Household level to the Customer level. In
order to do this, a table containing both columns is necessary. This can be accomplished by mapping a
table:
A. into the catalog twice, once at the Household level and once at the Customer Level.
B. into the catalog and select the Household column and the Customer column when selecting the
audience level.
C. in as a base table at the Household level and then map the same table in as a dimension table joined
to the base table on the Customercolumn.
D. in at the Household level as a table is normally mapped and then use the "Specify Additional
Audiences" screen to select the Customer columnwithin the table.
Answer: D
IBM자격증 000-470인증 000-470시험문제 000-470
NO.2 A user would like to create a 10% holdout control group from a Cell which contains 1000 Audience IDs.
Which Unica Campaign flowchart process box is the BEST way to accomplish this?
A. Merge process
B. Sample process
C. Segment process
D. Snapshot process
Answer: B
IBM 000-470 000-470 000-470 000-470
NO.3 The custom macro has been configured to select on "audience id" and a return value. When this custom
macro is executed an error is received. What could cause this problem?
A. There are user variables used in the custom macro.
B. The Expression Type is configured incorrectly for the custom macro.
C. The custom macro is the same as one of the Campaign built-in macros.
D. The custom macro is too large for the fields in the temp table (<TempTable>).
Answer: B
IBM 000-470 000-470최신덤프 000-470자격증
NO.4 A user has added a new Unica Campaign Attribute and would like to make that attribute available to the
Cognos reports. To do this, the user needs to:
A. use the Reports SQL generator to update the existing reporting views.
B. use the Reports SQL generator to create new views which include the new attribute.
C. do nothing, once the new column is added the reports model is automatically updated.
D. use the Cognos application administrator to create a new data framework which includes the new
attribute.
Answer: B
IBM 000-470덤프 000-470 000-470자격증
NO.5 A user is trying to create RAW SQL in a Select process. "Select IDs with" is selected but when the user
clicks on the advanced button the "RAW SQL for Record Selection" check box is greyed out. What is the
user doing wrong?
A. The correct tables are not mapped in.
B. A SQL Custom Macro has not been created.
C. The Select process is in Point and Click mode.
D. Unica Campaign is not connected to the database.
Answer: C
IBM 000-470인증 000-470 dumps 000-470자격증 000-470최신덤프
NO.6 A user is designing a Campaign flowchart. The user wants to retrieve and use a derived field which
was saved in a previous Campaign. Which of the steps below is correct to achieve this task?
A. The user cannot retrieve derived field expressions saved in other Campaigns.
B. Search the previous Campaign and copy the required derived field expression.
C. Retrieve the expression from the Stored Derived fields directory from the Options menu.
D. Retrieve the expression from the Stored Derived fields directory in a Select process box.
Answer: D
IBM자격증 000-470최신덤프 000-470
NO.7 A specialist is responsible for making sure that Unica Campaign flowcharts run successfully. If an error
occurs, the specialist needs to be informed by email. Therefore, the specialist creates a batch script which
interacts with the mail server and sends an email to the IT department helpdesk to be informed in case
problems arise in a Campaign flowchart. Where can the specialist best relate to this script from within the
Campaign flowchart? The specialist creates an outbound trigger, invokes the batch script in the trigger,
and:
A. assigns a trigger in a mail list or call list process.
B. schedules a trigger to run on a case-by-case basis.
C. uses the eMessage process to send out these emails.
D. assigns it in the Advanced settings section on the Campaign flowchart and has the trigger run on
Flowchart Run Error.
Answer: D
IBM기출문제 000-470 000-470최신덤프 000-470 dump 000-470
NO.8 A table Customer_master contains 1000 customer_ids. A select box was created and all the
customer_ids from the table were selected. However, when the select box was run, the output cell
contained only a fraction of the total customers. When a test query was performed in the above
mentioned select box, all 1000 customers were selected. What could be cause of this issue?
A. Global suppression.
B. The Select process was not configured properly.
C. The table mapping of Customer_master are out-of-date.
D. Incorrect audience level has been chosen for the Customer_master table.
Answer: A
IBM dump 000-470기출문제 000-470 pdf 000-470 000-470
NO.9 Which of the following is NOT true about how a user variable can be used in Unica Campaign?
A. A user variable can be used in a custom macro.
B. A user variable can be used in an outbound trigger.
C. A user variable can be used within a SQL statement.
D. A user variable can be defined in one flowchart and then referenced in another flowchart.
Answer: D
IBM자료 000-470기출문제 000-470 000-470
NO.10 A user is mapping a flat file into Unica Campaign. The user needs to ensure that the file ends with a:
A. tab.
B. comma.
C. closing bracket.
D. carriage return, line feed.
Answer: D
IBM기출문제 000-470 000-470 000-470 000-470 000-470
NO.11 A specialist creates a numeric user variable called MinBalance and assigns an initial value of 100 to it.
The specialist wants the Select process to return all IDs where the mapped field AccountBalance is
greater than MinBalance. What is the correct syntax to use?
A. MinBalance < AccountBalance
B. AccountBalance > MinBalance
C. AccountBalance > UserVar.MinBalance
D. AccountBalance is GT than UserVar.MinBalance
Answer: C
IBM기출문제 000-470 000-470인증
NO.12 A user needs to output data from a Unica Campaign flowchart and does not need to utilize the data
within the flowchart. This can be done by creating and outputting the data to a:
A. fact table.
B. general table.
C. dimension table.
D. base record table.
Answer: B
IBM 000-470인증 000-470 dumps 000-470 000-470 dump
NO.13 In a Unica Campaign flowchart Select process, how can a custom macro be profiled so that it appears in
the Select process "Available Fields" menu?
A. Select "Options" from the main menu in a flowchart, choose "Custom Macros...". Click "New Item" and
add the macro name and field expression.Go to the "Select" process and choose the macro from the
"Available Fields" column.
B. Select "Options" from the main menu in a flowchart, choose "Custom Macros...". Click "New Macro"
and add the macro name and fieldexpression. Go to the "Select" process and choose the macro from the
"Available Fields" column.
C. In the "Select" process box, create a "Derived Field" with a field name Profile_Test and enter the macro
name in the expression field. Go tothe "Select" process "Source" tab and select the macro from the
"Available Fields" column.
D. In the "Select" process box "Source" tab, click the Input field and the drop-down list appears. Go to
"Tables", select "UA_CUSTOMMACROS",and select the macro from the list. Select the macro when it
appears in the "Available Fields" column.
Answer: C
IBM덤프 000-470자료 000-470자격증 000-470시험문제
NO.14 In Unica Campaign, how are the Scheduler and Schedule process used?
A. The Schedule process is used to configure the Campaign Scheduler. This enables the use of the
Schedule process in a flowchart.
B. The Scheduler is an administration tool used to configure schedules. Use the Schedule process to
select the schedule to use as part of theflowchart.
C. The Scheduler is a Marketing Platform function that defines Schedule process attributes. The
Schedule process is used to initiate a process,series of processes, or an entire flowchart.
D. The Scheduler starts a flowchart even if it is not running, while the Schedule process in a flowchart
works only if the flowchart is running. TheScheduler should not be used to schedule a flowchart that uses
the Schedule process.
Answer: D
IBM 000-470자격증 000-470 dump
NO.15 In a Unica Campaign Flowchart, a customer database table (see below) is mapped in a Select process
box. There is a requirement to segment and organize customers based on their income, which would
typically have the values "HIGH" for customers whose income is greater than 100000 and "LOW" for
customers whose income is less than or equal to 100000. This value needs to be output with the final
target list.
Ideally which step should be executed to get the task done?
A. Alter the table to add a new column with the required logic.
B. Create a Persistent Derived field with the logic : IF(Customer_Demographic_Info.Income >
100000,'HIGH','LOW').
C. Create a Strategic Segment with the logic : IF(Customer_Demographic_Info.Income >
100000,'HIGH','LOW').
D. Create a User Variable HIGH and LOW with the logic: IF(Customer_Demographic_Info.Income >
100000,'HIGH','LOW').
Answer: B
IBM 000-470최신덤프 000-470 000-470인증 000-470
ITexamdump의 E20-385덤프의 VCE테스트프로그램과 70-332덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 648-385시험에 대비한 고품질 덤프와 000-623시험 최신버전덤프를 제공해드립니다. 최고품질 VCAC510시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기