Business-Objects인증 RDCR08201시험패스는 고객님의 IT업계종사자로서의 전환점이 될수 있습니다.자격증을 취득하여 승진 혹은 연봉협상 방면에서 자신만의 위치를 지키고 더욱 멋진 IT인사로 거듭날수 있도록 고고싱할수 있습니다. ITExamDump의 Business-Objects인증 RDCR08201덤프는 시장에서 가장 최신버전으로서 시험패스를 보장해드립니다.
ITExamDump의 Business-Objects인증 RDCR08201덤프를 구매하시고 공부하시면 밝은 미래를 예약한것과 같습니다. ITExamDump의 Business-Objects인증 RDCR08201덤프는 고객님이 시험에서 통과하여 중요한 IT인증자격증을 취득하게끔 도와드립니다. IT인증자격증은 국제적으로 인정받기에 취직이나 승진 혹은 이직에 힘을 가해드립니다. 학원공부나 다른 시험자료가 필요없이ITExamDump의 Business-Objects인증 RDCR08201덤프만 공부하시면Business-Objects인증 RDCR08201시험을 패스하여 자격증을 취득할수 있습니다.
ITExamDump 의 Business-Objects인증 RDCR08201덤프는 PDF버전과 소프트웨어버전 두가지 버전으로 되어있는데 소프트웨어버전은 시뮬레이션버전입니다. 소프트웨어버전의 문제를 푸는 과정은 시험현장을 연상케하여 시험환경에 먼저 적응하여 실제시험에서 높은 점수를 받도록 도와드릴수 있습니다.
최근 Business-Objects인증 RDCR08201시험이 IT업계에서 제일 높은 인지도를 가지고 있습니다.바라만 보지 마시고Business-Objects인증 RDCR08201시험에 도전해보세요. ITExamDump 의 Business-Objects인증 RDCR08201덤프로 시험준비공부를 하시면 한방에 시험패스 가능합니다. Business-Objects인증 RDCR08201덤프로 자격증취득에 가까워지고 나아가서는 IT업계에서 인정을 받는 열쇠를 소유한것과 같다고 할수 있습니다.
ITExamDump의 Business-Objects인증 RDCR08201시험덤프는 고객님의 IT자격증을 취득하는 꿈을 실현시켜 드리는 시험패스의 지름길입니다. Business-Objects인증 RDCR08201덤프에는 실제시험문제의 거의 모든 문제를 적중하고 습니다. ITExamDump의 Business-Objects인증 RDCR08201덤프가 있으면 시험패스가 한결 간편해집니다.
시험 번호/코드: RDCR08201
시험 이름: Business-Objects (Business Objects Certified Professional - Crystal Reports 2008 - Level One)
ITExamDump는 고객님의 IT자격증취득의 작은 소원을 이루어지게 도워드리는 IT인증시험덤프를 제공해드리는 전문적인 사이트입니다. ITExamDump 표 Business-Objects인증RDCR08201시험덤프가 있으면 인증시험걱정을 버리셔도 됩니다. ITExamDump 표 Business-Objects인증RDCR08201덤프는 시험출제 예상문제를 정리해둔 실제시험문제에 가장 가까운 시험준비공부자료로서 공을 들이지않고도 시험패스가 가능합니다.
ITExamDump는 유일하게 여러분이 원하는Business-Objects인증RDCR08201시험관련자료를 해결해드릴 수 잇는 사이트입니다. ITExamDump에서 제공하는 자료로 응시는 문제없습니다, 여러분은 고득점으로 시험을 통과할 것입니다.
RDCR08201 덤프무료샘플다운로드하기: http://www.itexamdump.com/RDCR08201.html
NO.1 Which formula uses the correct syntax to assign a variable a value in Crystal syntax?
A.Numbervar x; x = 5;
B.Dim x as Number x = 5
C.Dim x as Number x := 5
D.Numbervar x; x := 5;
Answer:D
Business-Objects자료 RDCR08201시험문제 RDCR08201 RDCR08201
NO.2 You make changes to the record selection criteria in a Crystal report. In which two circumstances
should you choose the Refresh Data option rather than the Use Saved Data option? (Choose two.)
A.When up-to-the-minute, current information must be displayed on the report.
B.When adding one or more selection criteria.
C.When it is important to avoid time delays caused by network traffic during database server connects.
D.When removing one or more existing selection criteria.
Answer:A D
Business-Objects dump RDCR08201 RDCR08201자격증
NO.3 Which three options are provided for web pagination? (Choose three.)
A.Navigation controls
B.Page breaking controls
C.Conditional Page Margin controls
D.Portrait versus Landscape controls
Answer:B C D
Business-Objects RDCR08201 RDCR08201최신덤프 RDCR08201 RDCR08201
NO.4 You create a new Crystal report and want to add a Top N sort, but the Group Sort Expert is inactive.
How can you activate the Group Sort Expert?
A.Insert a group name field.
B.Insert a summary field.
C.Insert a running total field.
D.Insert a formula field.
Answer:B
Business-Objects RDCR08201시험문제 RDCR08201 RDCR08201 dump RDCR08201
NO.5 You are creating a Crystal report to show just the Top N countries in an international sales report based
on total sales for the previous quarter. The value of N is dynamic. Which method must you use to achieve
the required result?
A.Using the Group Select Expert, create a parameter to set the value of N. Add a conditional formula to
view just the Top N countries.
B.After creating a parameter to set the value of N, reference that parameter within the Group Sort Expert.
Refresh the report setting the value of N in the parameter to show just the Top N countries.
C.Using the Group Sort Expert, create a parameter to set the value of N. Refresh the report setting the
value of N in the parameter to show just the Top N countries.
D.After creating a parameter to set the value of N, refresh the report to view just those countries with a
grand total that is greater than N.
Answer:B
Business-Objects RDCR08201 RDCR08201 RDCR08201 RDCR08201
NO.6 What are three Crystal Reports 2008 viewer features? (Choose three.)
A.Docked/Stationary Toolbar
B.Export to Microsoft PowerPoint
C.Java DHTML Viewer Exporting
D.Independent Group Tree Scrolling
Answer:A C D
Business-Objects인증 RDCR08201 dump RDCR08201 dumps
NO.7 Which two methods can you use to insert field objects into a Crystal report? (Choose two.)
A.Right-click the area where you want the field object to appear, then select Insert Field Object from the
Context menu.
B.Click the field name, drag it to the desired position and release the mouse button to insert.
C.Open the Section Expert and click the Insert button.
D.Click the field name and click the Insert to Report icon at the top of the Field Explorer. Drag the field to
the desired position and left-click to insert.
Answer:B D
Business-Objects자격증 RDCR08201자격증 RDCR08201 RDCR08201최신덤프 RDCR08201
NO.8 You design a Crystal summary report that is grouped by Region then by Customer Name. The Details
section is hidden. The report includes a bar chart that displays total orders by Customer Name for each
Region group. Which procedure will display the chart beside the sections that show Customer Name and
Total Sales?
A.Place the chart in the Group Header #1 section and format the section to Underlay Following Sections.
B.Place the chart in the Details section and format the section to suppress if duplicated.
C.Place the chart in the Group Footer #2 section and format the section to Underlay Following Sections.
D.Place the chart in the Group Footer #2 section and format the section to suppress if duplicated.
Answer:A
Business-Objects RDCR08201자료 RDCR08201 RDCR08201 RDCR08201자료
NO.9 What is the reason you cannot insert a Group layout chart in the Page Header section?
A.You do not have access to the database.
B.The Page Header section is suppressed.
C.A Group layout chart cannot be placed in the Page Header section.
D.You have not saved the report with data.
Answer:C
Business-Objects RDCR08201 RDCR08201
NO.10 You need a report that shows all customers and allows the report reader to view either a report listing all
days in the month to date or to view only the customers with daily sales greater than $5000. You decide to
use report alerts to accomplish this. Which formula properly sets the alert condition?
A.Sum ({Orders.Order Amount}, {Orders.Order Date}, "daily") > 5000
B.Sum ({Orders.Order Date}, {Orders.Order Amount}, "daily") > 5000}
C.IF Sum ({Orders.Order Amount}, {Orders.Order Date}, "daily") > 5000 THEN crCondition = "Enabled"
D.IF Sum ({Orders.Order Amount}, {Orders.Order Date}, "daily") > 5000 THEN AlertMessage = "Enabled"
Answer:A
Business-Objects기출문제 RDCR08201자료 RDCR08201자료 RDCR08201시험문제 RDCR08201자격증 RDCR08201인증
NO.11 You copy a report from BusinessObjects Enterprise and modify the report. Which two methods can you
use to save changes back to BusinessObjects Enterprise? (Choose two.)
A.Save the report using the Report Explorer.
B.From the Main menu, select Save and choose Enterprise.
C.From the Main menu, select Save and choose Web Folders.
D.Save the report using the Repository Explorer.
Answer:B D
Business-Objects pdf RDCR08201시험문제 RDCR08201 RDCR08201 RDCR08201기출문제
NO.12 You must create a static array in a Crystal report to be used for numeric calculations in other formulas.
How can you do this?
A.Global NumberVar Array newArray := Array (1, 2, 3, 4, 5);
B.Global NumberVar Array newArray := MakeArray (1, 2, 3, 4, 5);
C.Global NumberVar Array newArray := CreateArray (1, 2, 3, 4, 5);
D.Global NumberVar Array newArray := DefineArray (1, 2, 3, 4, 5);
Answer:B
Business-Objects시험문제 RDCR08201 RDCR08201
NO.13 Which special field can you use to display the date a report was last changed?
A.Modification Date
B.Modification LastDate
C.Modification LastUpdate
D.Modification Time
Answer:A
Business-Objects RDCR08201최신덤프 RDCR08201 RDCR08201
NO.14 Which two methods can you use to change the appearance of an object that you add to a Crystal report?
(Choose two.)
A.Hold down CTRL + Spacebar and click on the object.
B.Right-click the object and use the Format Editor.
C.Select the object and use the Formatting toolbar.
D.Drag-and-drop the object to the Formatting toolbar.
Answer:B C
Business-Objects덤프 RDCR08201덤프 RDCR08201덤프
NO.15 You want to create a formula using the Formula Workshop. You begin by right-clicking Formula Fields
in the Field Explorer and then click the New button. What happens after you click the New button?
A.You must select the type of formula and click OK.
B.The Formula Workshop opens with the Formula Editor inactive.
C.You must enter a formula name and click OK.
D.The Formula Workshop opens with the Formula Editor active.
Answer:C
Business-Objects RDCR08201 RDCR08201 RDCR08201
NO.16 You are designing a Crystal report that summarizes customer orders by country, then by state, then by
city and by customer ID. You want the report to print each country on a new page. The first page should
display a bar chart showing Total Sales by Country group in the Report Header and as much of the first
country as can be displayed. The last page should show the summary for the last country and the grand
total for the entire report. Which step can you perform in the Section Expert to achieve the design goal?
A.Set New Page After on for Group Footer #1
B.Conditionally format the New Page After property for Group Footer #1 using the formula "not
onlastrecord"
C.Format the New Page After property for Group Header #1 using the formula "not onlastrecord"
D.Set New Page After on for the Report Header section
Answer:B
Business-Objects인증 RDCR08201 RDCR08201 RDCR08201
NO.17 What two configuration options are valid for long Lists of Values (LOV) in Crystal Reports 2008?
(Choose two.)
A.UI Batch Size
B.Database Timeout
C.Maximum LOV Size
D.Maximum Rowset Records
Answer:A C
Business-Objects pdf RDCR08201 RDCR08201기출문제 RDCR08201최신덤프
NO.18 Which two statements describe how optional prompts behave in Crystal Reports 2008? (Choose two.)
A.If no value is entered in the prompt, all values are returned.
B.If no value is entered in the prompt, no values are returned.
C.If the parent prompt is optional, the child prompt must be optional.
D.If the child prompt is optional, the parent prompt must be optional.
Answer:A C
Business-Objects최신덤프 RDCR08201인증 RDCR08201 RDCR08201
NO.19 Which three lines of code will generate an error? (Choose three.)
A.Local Number x := 1;
B.Local NumberVal x := 1;
C.Local NumberVar x := 1;
D.Local NumberValue x := 1;
Answer:A B D
Business-Objects시험문제 RDCR08201 RDCR08201 dump
NO.20 You have created a report with a parameter but the parameter value is not always required. Which
method should you use?
A.Set Editable to True
B.Set Null Values to True
C.Set Custom Values to True
D.Set Optional Prompt to True
Answer:D
Business-Objects pdf RDCR08201 RDCR08201 RDCR08201 dump
NO.21 In Crystal Reports you select multiple report objects at the same time. Which two menu options become
available when you right-click one of the selected objects? (Choose two.)
A.Move
B.Insert
C.Delete
D.Copy
E.Cut
Answer:D E
Business-Objects RDCR08201 RDCR08201 RDCR08201
NO.22 Which three If-Then-Else control structure formulas in Crystal syntax will generate an error? (Choose
three.)
A.If {Orders.Order Amount} < 100 Then "Under $100" Else Is {Orders.Order Amount} in 100 to 200 Then
"Between $100 and $200"
B.If {Orders.order Amount} < 1000 Then "Low" Else "High"
C.If {Orders.Order Amount} < 100 Then formula = "Under $100" ElseIf {Orders.Order Amount} in 100 to
200 Then formula = "Between $100 and $200" EndIf
D.If {Orders.Order Amount} < 200 Then Under $200 Else If {Orders.Order Amount} in 200 to 300 Then
Between $200 and $300
Answer:A C D
Business-Objects기출문제 RDCR08201자격증 RDCR08201 pdf RDCR08201
NO.23 You want to use the Workbench feature to manage multiple reports and publish them to
BusinessObjects Enterprise as object packages. Your manager is concerned that any Crystal user could
access and make changes to the reports located on the Workbench. How can you address your
manager's concerns?
A.Encrypt object packages.
B.Password protect object packages.
C.Assign appropriate permissions to object packages that are published to BusinessObjects Enterprise.
D.Track changes on object packages using the Dependency Checker.
Answer:C
Business-Objects시험문제 RDCR08201기출문제 RDCR08201자료 RDCR08201 RDCR08201 RDCR08201
NO.24 When should you use parameters?
A.When creating conditional Top N reports.
B.When identifying the data source location.
C.When identifying trends in data.
D.When creating dynamic groups.
Answer:D
Business-Objects dump RDCR08201기출문제 RDCR08201 RDCR08201
NO.25 After you select a BusinessObjects Universe to use as the data source for a Crystal report, you create
a query using the BusinessObjects Query Panel. What must you do to access the underlying data source?
A.Create a local cache of the data source.
B.Create a connection to the data source.
C.Create a local ODBC resource for the data source.
D.Log in to BusinessObjects Enterprise.
Answer:D
Business-Objects dumps RDCR08201최신덤프 RDCR08201 RDCR08201덤프
NO.26 Which two reasons explain why the Group Sort Expert is disabled when you attempt to create a Top N
report? (Choose two.)
A.You are in Design view.
B.The data was not refreshed.
C.You are in a Drill Down view.
D.The report is missing a summary value.
Answer:C D
Business-Objects dump RDCR08201덤프 RDCR08201 dump RDCR08201
NO.27 You want to see a list of formulas containing references to a specific field. Which method can you use?
A.Browse Field
B.Repository Explorer
C.Formula Field Search
D.Global Formula Search
Answer:D
Business-Objects RDCR08201시험문제 RDCR08201시험문제 RDCR08201
NO.28 Which two formulas can you use to determine whether the content of a string is a number? (Choose
two.)
A.IsNumber({Orders.Customer ID})
B.NumberText({Orders.Customer ID})
C.IsNumeric({Orders.Customer ID})
D.NumericText({Orders.Customer ID})
Answer:C D
Business-Objects RDCR08201 RDCR08201
NO.29 Which method can you use to insert field objects into a Crystal report?
A.Select the Field option from the Insert menu.
B.Right-click the area where you want the field object to appear, then select Insert Field Object from the
Context menu.
C.Click the field name, drag it to the desired position and release the mouse button to insert.
D.Click the Field button on the Formatting toolbar.
Answer:C
Business-Objects자료 RDCR08201 pdf RDCR08201인증
NO.30 How must you register multiple XML export formats in Crystal Reports 2008?
A.Configure XML export formats using the Define XML dialog.
B.Configure XML export formats using the Manage XML dialog.
C.Add XML export formats using the Manage XML Exporting Formats dialog.
D.Add XML export formats using the Define XML Exporting Formats dialog.
Answer:C
Business-Objects RDCR08201 RDCR08201자격증 RDCR08201
Business-Objects인증 RDCR08201시험은 중요한 IT인증자격증을 취득하는 필수시험과목입니다Business-Objects인증 RDCR08201시험을 통과해야만 자격증 취득이 가능합니다.자격증을 많이 취득하면 자신의 경쟁율을 높여 다른능력자에 의해 대체되는 일은 면할수 있습니다.ITExamDump에서는Business-Objects 인증RDCR08201시험대비덤프를 출시하여 여러분이 IT업계에서 더 높은 자리에 오르도록 도움드립니다. 편한 덤프공부로 멋진 IT전문가의 꿈을 이루세요.
댓글 없음:
댓글 쓰기