Microsoft 070-513인증시험을 어떻게 준비하면 될가 아직도 고민하고 계시죠? 학원에 등록하자니 시간도 없고 돈도 많이 들고 쉽게 엄두가 나지 않는거죠? ITExamDump제품을 구매하신다면 그런 부담을 이제 끝입니다. ITExamDump덤프는 더욱 가까지 여러분들께 다가가기 위하여 그 어느 덤프판매 사이트보다 더욱 저렴한 가격으로 여러분들을 맞이하고 있습니다. Microsoft 070-513덤프는ITExamDump제품이 최고랍니다.
Microsoft인증 070-513시험패스 공부방법을 찾고 있다면 제일 먼저ITExamDump를 추천해드리고 싶습니다. Microsoft인증 070-513시험이 많이 어렵다는것은 모두 알고 있는 것입니다. ITExamDump에서 출시한 Microsoft인증 070-513덤프는 실제시험을 대비하여 연구제작된 멋진 작품으로서 Microsoft인증 070-513시험적중율이 최고입니다. Microsoft인증 070-513시험패스를 원하신다면ITExamDump의 제품이 고객님의 소원을 들어줄것입니다.
IT인증자격증은 국제적으로 승인받는 자격증이기에 많이 취득해두시면 취업이나 승진이나 이직이나 모두 편해집니다. 다른 사람이 없는 자격증을 내가 가지고 있다는것은 실력을 증명해주는 수단입니다. Microsoft인증 070-513시험은 널리 승인받는 자격증의 시험과목입니다. Microsoft인증 070-513덤프로Microsoft인증 070-513시험공부를 하시면 시험패스 난이도가 낮아지고 자격증 취득율이 높이 올라갑니다.자격증을 많이 취득하여 취업이나 승진의 문을 두드려 보시면 빈틈없이 닫힌 문도 활짝 열릴것입니다.
시험 번호/코드: 070-513
시험 이름: Microsoft (TS: Windows Communication Foundation velopment with Microsoft .NET Framework 4)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 163 문항
업데이트: 2013-09-26
우리ITExamDump 사이트에Microsoft 070-513관련자료의 일부 문제와 답 등 문제들을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 여러분은 이것이야 말로 알맞춤이고, 전면적인 여러분이 지금까지 갖고 싶었던 문제집이라는 것을 느끼게 됩니다.
ITExamDump의 제품들은 모두 우리만의 거대한IT업계엘리트들로 이루어진 그룹 즉 관련업계예서 권위가 있는 전문가들이 자기만의 지식과 지금까지의 경험으로 최고의 IT인증관련자료를 만들어냅니다. ITExamDump의 문제와 답은 정확도 적중률이 아주 높습니다. 우리의 덤프로 완벽한Microsoft인증070-513시험대비를 하시면 되겠습니다. 이렇게 어려운 시험은 우리Microsoft인증070-513덤프로 여러분의 고민과 꿈을 한방에 해결해드립니다.
IT자격증을 많이 취득하여 IT업계에서 자신만의 단단한 자리를 보장하는것이 여러분들의 로망이 아닐가 싶습니다. ITExamDump의 완벽한 Microsoft인증 070-513덤프는 IT전문가들이 자신만의 노하우와 경험으로 실제Microsoft인증 070-513시험문제에 대비하여 연구제작한 완벽한 작품으로서 100%시험통과율을 보장합니다.
070-513 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-513.html
NO.1 A Windows Communication Foundation (WCF) service uses the following service contract.
[ServiceContract]
public interface IService
{
[OperationContract]
string Operation1(string s);
}
You need to ensure that the operation contract Operation1 responds to HTTP POST requests.
Which code segment should you use?
A.[OperationContract]
[WebInvoke(Method="POST")]
string Operation1(string s);
B.[OperationContract]
[WebGet(UriTemplate="POST")]
string Operation1(string s);
C.[OperationContract(ReplyAction="POST")]
string Operation1(string s);
D.[OperationContract(Action="POST")]
string Operation1(string s);
Answer: A
Microsoft 070-513시험문제 070-513 070-513인증 070-513
NO.2 host.Description.Behaviors.Add(new RoutingBehavior(rc));
Request-reply operations are failing. You need to ensure that the router can handle one-way and
request-reply operations.
What should you do?
A.Change line 03 as follows:
typeof(IRequestReplyRouter),
B.Change line 03 as follows:
typeof(IDuplexSessionRouter),
C.Change line 10 as follows:
typeof(IRequestReplyRouter)
D.Change line 10 as follows:
typeof(IDuplexSessionRouter)
Answer: B
Microsoft기출문제 070-513기출문제 070-513 070-513기출문제 070-513자료
12.You are modifying an existing Windows Communication Foundation (WCF) service that is defined as
follows:
[ServiceContract]
public interface IMessageProcessor
{
[OperationContract]
void ProcessMessages();
}
public class MessageProcessor: IMessageProcessor
{
public void ProcessMessage();
SubmitOrder();
}
SubmitOrder makes a call to another service. The ProcessMessage method does not perform as
expected under a heavy load.
You need to enable processing of multiple messages. New messages must only be processed when the
ProcessMessage method is not processing requests,
or when it is waiting for calls to SubmitOrder to return.
Which attribute should you apply to the MessageProcessor class?
A.CallbackBehavior(ConcurrencyMode=ConcurencyMode.Reentrant)
B.CallbackBehavior(ConcurrencyMode=ConcurrencyMode.Multiple)
C.ServiceBehavior(ConcurrencyMode=ConcurrencyMode.Reentrant)
D.ServiceBehavior(ConcurrencyMode=ConcurrencyMode.Multiple)
Answer: C
Microsoft 070-513 070-513 dump 070-513
13.A Windows Communication Foundation (WCF) service listens for messages at
net.tcp://www.contoso.com/MyService.
It has a logical address at http://www.contoso.com/MyService. The configuration for the WCF client is as
follows:
<endpoint address="http://www.contoso.com/MyService"
binding="netTcpBinding"
bindingConfiguraton="NetTcpBinding_IMyService"
contract="ServiceReference1.IMyService"
name="NetTcpBinding_IMyService"/>
The generated configuration does not provide enough information for the client to communicate with the
server.
You need to update the client so that it can communicate with the server. What should you do?
A.In the client configuration, change the value of the address attribute to
net.tcp://www.contoso.com/MyService
B.In the client configuration, change the value of the address attribute to
net.tcp://www.contoso.com/MyService listen=http://www.contoso.com/MyService.
C.After instantiating the client and before invoking any service operation, add this line of code.
EndpointBehaviors.Add(new EndpointDiscoveryBehavior(){ Enabled = true });
D.After instantiating the client and before invoking any service operation, add this line of code.
client.Endpoint.Behaviors.Add(new ClientViaBehavior(new
Uri("net.tcp://www.contoso.com/IMyService")));
Answer: D
Microsoft 070-513자료 070-513 dump 070-513 dump 070-513자격증
14.A Windows Communication Foundation (WCF) service is self-hosted in a console application.
The service implements the IDataAccess contract, which is defined in the MyApplication namespace.
The service is implemented in a class named DataAccessService which implements the IDataAccess
interface and also is defined in the MyApplication namespace. The hosting code is as follows.
(Line numbers are included for reference only.)
01 static void Main(string[] args)
02 {
03 ServiceHost host;
04 ...
05 host.Open();
06 Console.ReadLine();
07 host.Close();
08 }
You need to create a ServiceHost instance and assign it to the host variable. You also need to instantiate
the service host.
Which line of code should you insert at line 04?
A.host = new ServiceHost("MyApplication.DataAccessService");
B.host = new ServiceHost("MyApplication.DataAccess");
C.host = new ServiceHost(typeof(IDataAccess));
D.host = new ServiceHost(typeof(DataAccessService));
Answer: D
Microsoft덤프 070-513기출문제 070-513 070-513 pdf 070-513 pdf 070-513
15.A Windows Communication Foundation (WCF) service implements the following contract.
[ServiceContract]
public interface IHelloService
{
[OperationContract(WebGet(UriTemplate="hello?name={name}"))]
string SayHello(string name);
}
The implementation is as follows:
public class HelloService: IHelloService
{
public string SayHello(string name)
{
return "Hello " + name;
}
}
The service is self-hosted, and the hosting code is as follows:
WebServiceHost svcHost = CreateHost();
svcHost.Open();
Console.ReadLine();
svcHost.Close();
You need to implement CreateHost so that the service has a single endpoint hosted at
http://localhost:8000/HelloService.
Which code segment should you use?
A.WebServiceHost svcHost = new WebServiceHost(typeof(HelloService));
svcHost.AddServiceEndpoint(typeof(IHelloService),
new WebHttpBinding(WebHttpSecurityMode.None),
"http://localhost:8000/HelloService");
return svcHost;
B.Uri baseAddress = new Uri("http://localhost:8000");
WebServiceHost svcHost = new WebServiceHost(typeof(HelloService), baseAddress);
svcHost.AddServiceEndpoint(typeof(IHelloService),
new WebHttpBinding(WebHttpSecurityMode.None),
"HelloService");
return svcHost;
C.WebServiceHost svcHost = new WebServiceHost(new HelloService());
svcHost.AddServiceEndpoint(typeof(IHelloService),
new WebHttpBinding(WebHttpSecurityMode.None),
"http://localhost:8000/HelloService");
retumn svcHost
D.Uri baseAddress = new Uri("http://localhost:8000/");
WebServiceHost svcHost = new WebServiceHost(new HelloService(), baseAddress);
svcHost.AddServiceEndpoint(typeof(IHelloService),
new WebHttpBinding(WebHttpSecurityMode.None),
"HelloService");
retumn svcHost;
Answer: B
Microsoft dump 070-513자격증 070-513자료 070-513 070-513덤프
16.You are building a client for a Windows Communication Foundation (WCF) service.
You need to create a proxy to consume this service. Which class should you use?
A.ChannelFactory<TChannel>
B.ServiceHost
C.ClientRuntime
D.CommunicationObject
Answer: A
Microsoft 070-513 070-513 070-513최신덤프
17.You are working with a Windows Communication Foundation (WCF) client application that has a
generated proxy named SampleServiceProxy.
When the client application is executing, in line 04 of the following code, the channel faults (Line numbers
are included for reference only.)
01 SampleServiceProxy proxy = new SampleServiceProxy();
02 try
03 {
04 proxy.ProcessInvoice(invoice);
05 }
06 catch
07 {
08 if(proxy.State == CommunicationState.Faulted)
09 {
10 ...
11 }
12 }
13 proxy.UpdateCustomer(customer);
You need to return proxy to a state in which it can successfully execute the call in line 13.
Which code segment should you use at line 10?
A.proxy.Close();
B.proxy = new SampleServiceProxy();
C.proxy.Abort();
D.proxy.Open();
Answer: B
Microsoft 070-513 070-513 070-513
18.A Windows Communication Foundation (WCF) service has a callback contract. You are developing a
client application that will call this service.
You must ensure that the client application can interact with the WCF service. What should you do?
A.On the OperationContractAttribute, set the AsyncPattern property value to true.
B.On the OperationContractAttribute, set the ReplyAction property value to the endpoint address of the
client.
C.On the client, create a proxy derived from DuplexClientBase<TChannel>.
D.On the client, use GetCallbackChannel<T>.
Answer: C
Microsoft 070-513자격증 070-513 pdf 070-513 070-513자료
NO.3 );
NO.4 )
NO.5 You are developing a data contract for a Windows Communication Foundation (WCF) service.
The data in the data contract must participate in round trips. Strict schema validity is not required.
You need to ensure that the contract is forward-compatible and allows new data members to be added to
it.
Which interface should you implement in the data contract class?
A.ICommunicationObject
B.IExtension<T>
C.IExtensibleObject<T>
D.IExtensibleDataObject
Answer: D
Microsoft 070-513인증 070-513자료
NO.6 You are creating a Windows Communication Foundation (WCF) service that implements operations in a
RESTful manner.
You need to add a delete operation. You implement the delete method as follows:
void DeleteItems(string id);
You need to configure WCF to call this method when the client calls the service with the HTTP DELETE
operation. What should you do?
A.Add the WebInvoke(UriTemplate="/Items/{id}", Method="DELETE") attribute to the operation
B.Add the HttpDelete atribute to the operation
C.Replace the string parameter with a RemovedActivityAction parameter
D.Replace the return type with RemovedActivityAction.
Answer: A
Microsoft 070-513자료 070-513 070-513 070-513인증 070-513
NO.7 A class named TestService implements the following interface:
[ServiceContract]
public interface ITestService
{
[OperationContract]
DateTime GetServiceTime();
}
TestService is hosted in an ASP.NET application.
You need to modify the application to allow the GetServiceTime method to return the data formatted as
JSON.
It must do this only when the request URL ends in /ServiceTime. What should you do?
A.Add this attribute to the GetServiceTime method.
[WebInvoke(Method="POST")]
In the web.config file, add this element to system.serviceModel/behaviors/endpointBehaviors.
<behavior name="Json">
<enableWebScript />
</behavior>
In the web.config file, configure TestService in the system.serviceModel/services collection as follows:
<service name="TestService">
<endpoint address="/ServiceTime"
contract="TestService"
behaviorConfiguration="Json"
binding="webHttpBinding" />
</service>
B.Add this attribute to the GetServiceTime method.
[WebInvoke(Method="GET", UriTemplate="/ServiceTime", ResponseFormat=WebMessageFormat.Json)]
In the web.config file, configure TestService in the system.serviceModel/services collection as follows:
<service name="TestService">
<endpoint address="/ServiceTime"
contract="TestService"
binding="webHttpBinding"/>
</service>
C.Add this attribute to the GetServiceTime method
[WebGet(ResponseFormat=WebMessageFormat.Json, UriTemplate="/ServiceTime")]
Create a new svc file named Jsonversion.svc with the following content.
<% @ServiceHost Service="TestService"
Factory="System.ServiceModel.ActivationWebServiceHostFactory" %>
D.Add this attribute to the GetServiceTime method.
[WebGet(UriTemplate="Json)/ServiceTime")]
Create a new .svc file named Jsonversion.svc with the following content
<% @ServiceHost Service="TestService"
Factory="System.ServiceModel.ActivationWebServiceHostFactory" %>
Answer: C
Microsoft dumps 070-513최신덤프 070-513 070-513 070-513자료 070-513
NO.8 A Windows Communication Foundation (WCF) application uses a data contract that has several data
members.
You need the application to throw a SerializationException if any of the data members are not present
when a serialized instance of the data contract is deserialized.
What should you do?
A.Add the KnownType attribute to the data contract.
Set a default value in each of the data member declarations.
B.Add the KnownType attribute to the data contract.
Set the Order property of each data member to unique integer value.
C.Set the EmitDefaultValue property of each data member to false.
D.Set the lsRequired property of each data member to true.
Answer: D
Microsoft 070-513최신덤프 070-513
NO.9 new NetTcpBinding(),
NO.10 A Windows Communication Foundation (WCF) client configuration file contains the following XML
segment in the system.serviceModel element.
<client>
<endpoint address="net.tcp://server/ContosoService"
binding="netTcpBinding"
contract="Contoso.IContosoService"
name="netTcp"/>
<endpoint address="net.pipe://localhost/ContosoService"
binding="netNamedPipeBinding"
contract="Contoso.IContosoService"
name="netPipe" />
</client>
You need to create a channel factory that can send messages to the endpoint listening at
net.pipe://localhost/ContosoService.
Which code segment should you use?
A.ChannelFactory<Contoso.IContoso> factory = new
ChannelFactory<Contoso.IContoso>("Contoso.IContoso");
B.ChannelFactory<Contoso.IContoso> factory = new
ChannelFactory<Contoso.IContoso>("netNamedPipeBinding");
C.ChannelFactory<Contoso.IContoso> factory = new ChannelFactory<Contoso.IContoso>("netPipe");
D.ChannelFactory<Contoso.IContoso> factory = new
ChannelFactory<Contoso.IContoso>("net.pipe//localhost/ContosoService");
Answer: C
Microsoft자격증 070-513 070-513
NO.11 The following is an example of a SOAP envelope.
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope">
<s:Header>
<h:StoreId xmlns:h="http://www.contoso.com">6495</h:StoreId>
</s:Header>
<s:Body>
<CheckStockRequest xmlns="http://www.contoso.com">
<ItemId>2469<ItemId>
</CheckStockRequest>
</s: Body>
</s:Envelope>
You need to create a message contract that generates the SOAP envelope.
Which code segment should you use?
A.[MessageContract(WrapperName="http://www.contoso.com")]
public class CheckStockRequest
{
[MessageHeader(Namespace="http://www.contoso.com")]
public int StoreId { get; set; }
[MessageBodyMember(Namespace="http://www.contoso.com")]
public int ItemId { get; set; }
}
B.[MessageContract(WrapperNamespace="http://www.contoso.com")]
public class CheckStockRequest
{
[MessageHeader(Namespace="http://www.contoso.com")]
public int StoreId { get; set; }
[MessageBodyMember(Namespace="http://www contoso.com")]
public int ItemId { get; set; }
}
C.[MessageContract(WrapperNamespace="http://www.contoso.com")]
public class CheckStockRequest
{
[MessageHeader(Namespace="http://www.contoso.com")]
public int StoreId { get; set; }
public int ItemId { get; set; }
}
D.[MessageContract(WrapperNamespace="http://www.contoso.com")]
public class CheckStockRequest
{
[MessageHeader(Namespace="http://www.contoso.com")]
public int StoreId { get; set; }
[MessageBodyMember]
public int ItemId { get; set; }
}
Answer: D
Microsoft 070-513 dumps 070-513
NO.12 A Windows Communication Foundation (WCF) application uses the following data contract
[DataContract]
public class Person
{
[DataMember]
public string firstName;
[DataMember]
public string lastName;
[DataMember]
public int age;
[DataMember]
public int ID;
}
You need to ensure that the following XML segment is generated when the data contract is serialized.
<Person>
<firstName xsi:nil="true"/>
<lastName xsi:nil="true"/>
<ID>999999999<ID>
</Person>
Which code segment should you use?
A.[DataMember]
public string firstName;
[DataMember]
public string lastName;
[DataMember(EmitDefaultValue = true)]
public int age = 0;
[DataMember(EmitDefaultvValue = true)]
public int ID = 999999999;
B.[DataMember(EmitDefaultValue = false)]
public string firstName = null;
[DataMember(EmitDefaultValue = false)]
public string lastName = null;
[DataMember(EmitDefaultValue = true)]
public int age = -1;
[DataMember(EmitDefaultValue = false)]
public int ID = 999999999;
C.[DataMember(EmitDefaultValue = true)]
public string firstName;
[DataMember(EmitDefaultValue = true)]
public string lastName;
[DataMember(EmitDefaultValue = false)]
public int age = -1;
[DataMember(EmitDefaultValue = false)]
public int ID = 999999999;
D.[DataMember]
public string firstName = null;
[DataMember]
public string lastName = null;
[DataMember(EmitDefaultValue = false)]
public int age = 0;
[DataMember(EmitDefaultValue = false)]
public int ID = 999999999;
Answer: D
Microsoft 070-513 070-513 pdf
NO.13 You are creating a Windows Communication Foundation (WCF) service. You do not want to expose the
internal implementation at the service layer.
You need to expose the following class as a service named Arithmetic with an operation named Sum:
public class Calculator
{
public int Add(int x, int y)
{
}
}
Which code segment should you use?
A.[ServiceContract(Namespace="Arithmetic")]
public class Calculator
{
[Operation Contract(Action="Sum")]
public int Add(int x, int y)
{}
}
B.[ServiceContract(ConfigurationName="Arithmetic")]
public class Calculator
{
[Operation Contract(Action="Sum")]
public int Add(int x, int y)
{}
}
C.[ServiceContract(Name="Arithmetic")]
public class Calculator
{
[OperationContract(Name="Sum")]
public int Add(int x, int y)
{}
}
D.[ServiceContract(Name="Arithmetic")]
public class Calculator
{
[OperationContract(ReplyAction="Sum")]
public int Add(int x, int y)
{}
}
Answer: C
Microsoft 070-513시험문제 070-513 070-513 dump 070-513자격증 070-513
NO.14 RoutingConfiguration rc = new RoutingConfiguration();
NO.15 You are creating a Windows Communication Foundation (WCF) service that is implemented as follows.
(Line numbers are included for reference only.)
01 [ServiceContract]
02 [ServiceBehavior(IncludeExceptionDetailsInFaults = true)]
03 public class OrderService
04 {
05 [OperationContract]
06 public void SubmitOrder(Order anOrder)
07 {
08 try
09 {
10 ...
11 }
12 catch(DivideByZeroException ex)
13 {
14 ...
15 }
16 }
17 }
You need to ensure that the stack trace details of the exception are not included in the error information
sent to the client.
What should you do?
A.Replace line 14 with the following line:
throw;
B.Replace line 14 with the following line:
throw new FaultException<Order>(anOrder, ex.ToString());
C.After line 05, add the following line:
[FaultContract(typeof(FaultException<Order>))]
Replace line 14 with the following line:
throw ex;
D.Alter line 05, add the following line:
[FaultContract(typeof(FaultException<Order>))]
Replace line 14 with the following line:
throw new FaultException<Order>(anOrder, "Divide by zero exception");
Answer: D
Microsoft dumps 070-513인증 070-513자격증 070-513자료 070-513
NO.16 new EndpointAddress("net.tcp://localhost:8080/Logger")
NO.17 rc.FilterTable.Add(new MatchAllMessageFilter(), lep);
NO.18 You are creating a Windows Communication Foundation (WCF) service. You have the following
requirements:
Messages must be sent over TCP
The service must support transactions.
Messages must be encoded using a binary encoding
Messages must be secured using Windows stream-based security.
You need to implement a custom binding for the service. In which order should the binding stack be
configured?
A.tcpTransport, windowsStreamSecurity, transactionFlow, binaryMessageEncoding
B.transactionFlow, binaryMessageEncoding, windowsStreamSecurity, tcpTransport
C.windowsStreamSecurity, tcpTransport, binaryMessageEncoding, transactionFlow
D.binaryMessageEncoding, transactionFlow, tcpTransport, windowsStreamSecurity
Answer: B
Microsoft 070-513 070-513 pdf 070-513
NO.19 A Windows Communication Foundation (WCF) service implements a contract with one-way and
request-reply operations.
The service is exposed over a TCP transport. Clients use a router to communicate with the service.
The router is implemented as follows. (Line numbers are included for reference only.)
01 ServiceHost host = new ServiceHost(typeof(RoutingService));
02 host.AddServiceEndpoint(
03 typeof(ISimplexDatagramRouter),
04 new NetTcpBinding(), "net.tcp://localhost/Router"
05 );
06 List<ServiceEndpoint> lep = new List<ServiceEndpoint>();
07 lep.Add(
08 new ServiceEndpoint(
09 ContractDescription.GetContract(
10 typeof(ISimplexDatagramRouter)
11 ),
NO.20 You are developing a client that sends several types of SOAP messages to a Windows Communication
Foundation (WCF)
service method named PostData. PostData is currently defined as follows:
[OperationContract]
void PostData(Order data);
You need to modify PostData so that it can receive any SOAP message. Which code segment should
you use?
A.[OperationContract(IsOneWay=true, Action="*", ReplyAction="*")]
void PostData(Order data);
B.[OperationContract(IsOneWay=true, Action="*", ReplyAction = "*")]
void PostData(BodyWriter data);
C.[OperationContract]
void PostData(BodyWriter data);
D.[OperationContract]
void PostData(Message data);
Answer: D
Microsoft dump 070-513 070-513 070-513
ITexamdump의 JN0-380덤프의 VCE테스트프로그램과 3107덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-342시험에 대비한 고품질 덤프와 70-410시험 최신버전덤프를 제공해드립니다. 최고품질 FCNSP.v5시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기