Microsoft 자격증 070-536 시험덤프

070-536인증시험은Microsoft인증시험중의 하나입니다.그리고 또한 비중이 아주 큰 인증시험입니다. 그리고Microsoft 070-536인증시험 패스는 진짜 어렵다고 합니다. 우리ITExamDump에서는 여러분이070-536인증시험을 편리하게 응시하도록 전문적이 연구팀에서 만들어낸 최고의070-536덤프를 제공합니다, ITExamDump와 만남으로 여러분은 아주 간편하게 어려운 시험을 패스하실 수 있습니다,

Microsoft인증070-536시험덤프공부자료는ITExamDump제품으로 가시면 자격증취득이 쉬워집니다. ITExamDump에서 출시한 Microsoft인증070-536덤프는 이미 사용한 분들에게 많은 호평을 받아왔습니다. 시험적중율 최고에 많은 공부가 되었다고 희소식을 전해올때마다 ITExamDump는 더욱 완벽한Microsoft인증070-536시험덤프공부자료로 수정하고기 위해 최선을 다해왔습니다. 최고품질으Microsoft인증070-536덤프공부자료는ITExamDump에서만 찾아볼수 있습니다.

ITExamDump에서는 시장에서 가장 최신버전이자 적중율이 가장 높은 Microsoft인증 070-536덤프를 제공해드립니다. Microsoft인증 070-536덤프는 IT업종에 몇십년간 종사한 IT전문가가 실제 시험문제를 연구하여 제작한 고품질 공부자료로서 시험패스율이 장난 아닙니다. 덤프를 구매하여 시험에서 불합격성적표를 받으시면 덤프비용 전액을 환불해드립니다.

우리ITExamDump 사이트에Microsoft 070-536관련자료의 일부 문제와 답 등 문제들을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 여러분은 이것이야 말로 알맞춤이고, 전면적인 여러분이 지금까지 갖고 싶었던 문제집이라는 것을 느끼게 됩니다.

ITExamDump을 선택함으로 100%인증시험을 패스하실 수 있습니다. 우리는Microsoft 070-536시험의 갱신에 따라 최신의 덤프를 제공할 것입니다. ITExamDump에서는 무료로 24시간 온라인상담이 있으며, ITExamDump의 덤프로Microsoft 070-536시험을 패스하지 못한다면 우리는 덤프전액환불을 약속 드립니다.

시험 번호/코드: 070-536
시험 이름: Microsoft (TS:MS.NET Framework 2.0-Application Develop Foundation)

만약 아직도 우리를 선택할지에 대하여 망설이고 있다면. 우선은 우리 사이트에서 ITExamDump가 제공하는 무료인 일부 문제와 답을 다운하여 체험해보시고 결정을 내리시길 바랍니다.그러면 우리의 덤프에 믿음이;갈 것이고,우리 또한 우리의 문제와 답들은 무조건 100%통과 율로 아주 고득점으로Microsoft인증070-536험을 패스하실 수 있습니다,

070-536 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-536.html

NO.1 You are writing a method to compress an array of bytes. The array is passed to the method in a
parameter named document.
You need to compress the incoming array of bytes and return the result as an array of bytes.
Which code segment should you use?
A. MemoryStream strm = new MemoryStream(document);
DeflateStream deflate = new DeflateStream(strm,
CompressionMode.Compress);
byte[] result = new byte[document.Length];
deflate.Write(result,0, result.Length);
return result;
B. MemoryStream strm = new MemoryStream(document);
DeflateStream deflate = new DeflateStream(strm,
CompressionMode.Comress);
deflate.Write(document, 0, document.Length);
deflate.Close();
return strm.ToArray();
C. MemoryStream strm = new MemoryStream();
DeflateStream deflate = new DeflateStream(strm,
CompressionMode.Compress);
deflate.Write(document, 0, document.Length);
deflate.Close();
return strm.ToArray();
D. MemoryStream inStream = new MemoryStream(document);
DeflateStream deflate = new DeflateStream(inStream,
CompressionMode.Compress);
MemoryStream outStream = new MemoryStream();
int b;
while ((b = deflate.ReadByte()) != -1)
{
outStream.WriteByte((byte)b);
}
return outStream.ToArray();
Answer: C

Microsoft   070-536덤프   070-536덤프   070-536   070-536   070-536

NO.2 You are developing a custom event handler to automatically print all open documents. The event
handler helps specify the number of copies to be printed. You need to develop a custom event arguments
class to pass as a parameter to the event handler.
Which code segment should you use?
A. public class PrintingArgs
{
private int copies;
public PrintingArgs(int numberOfCopies)
{
this.copies = numberOfCopies;
}
public int Copies
{
get { return this.copies; }
}
}
B. public class PrintingArgs : EventArgs
{
private int copies;
public PrintingArgs(int numberOfCopies)
{
this.copies = numberOfCopies;
}
public int Copies
{
get { return this.copies; }
}
}
C. public class PrintingArgs
{
private EventArgs eventArgs;
public PrintingArgs(EventArgs ea)
{
this.eventArgs = ea;
}
public EventArgs Args
{
get { return eventArgs; }
}
}
D. public class PrintingArgs : EventArgs
{
private int copies;
}
Answer: B

Microsoft   070-536덤프   070-536기출문제

NO.3 You are writing an application that uses SOAP to exchange data with other applications. You use a
Department class that inherits from ArrayList to send objects to another application. The Department
object is named dept.
You need to ensure that the application serializes the Department object for transport by using SOAP.
Which code should you use?
A. SoapFormatter formatter = new SoapFormatter();
byte[] buffer = new byte[dept.Capacity];
MemoryStream stream = new MemoryStream(buffer);
foreach (object o in dept)
{
formatter.Serialize(stream, o);
}
B. SoapFormatter formatter = new SoapFormatter();
byte[] buffer = new byte[dept.Capacity];
MemoryStream stream = new MemoryStream(buffer);
formatter.Serialize(stream, dept);
C. SoapFormatter formatter = new SoapFormatter();
MemoryStream stream = new MemoryStream();
foreach (object o in dept)
{
Formatter.Serialize(stream, o);
}
D. SoapFormatter formatter = new SoapFormatter();
MemoryStream stream = new MemoryStream();
formatter.Serialize(stream, dept);
Answer: D

Microsoft자격증   070-536   070-536   070-536최신덤프   070-536

NO.4 You write the following code segment to call a function from the Win32 Application Programming
Interface (API) by using platform invoke.
string personName = "N?el";
string msg = "Welcome" + personName + "to club"!";
bool rc = User32API.MessageBox(0, msg, personName, 0);
You need to define a method prototype that can best marshal the string data.
Which code segment should you use?
A. [DllImport("user32", CharSet = CharSet.Ansi)]
public static extern bool MessageBox(int hWnd, String text, String caption, uint type);
}
B. [DllImport("user32", EntryPoint = "MessageBoxA", CharSet = CharSet.Ansi)] public static extern bool
MessageBox(int hWnd, [MarshalAs(UnmanagedType.
LPWStr)]
String text, [MarshalAs(UnmanagedType.LPWStr)]String caption, uint type); }
C. [DllImport("user32", CharSet = CharSet.Unicode)]
public static extern bool MessageBox(int hWnd, String text, String caption, uint type);
}
D. [DllImport("user32", EntryPoint = "MessageBoxA", CharSet = CharSet.Unicode)] public static extern
bool MessageBox(int hWnd, [MarshalAs(UnmanagedType.
LPWStr)]String text,
[MarshalAs(UnmanagedType.LPWStr)]String caption, uint type); }
Answer: C

Microsoft   070-536   070-536 pdf

NO.5 You are creating a class that uses unmanaged resources. This class maintains references to managed
resources on other objects. You need to ensure that users of this class can explicitly release resources
when the class instance ceases to be needed. Which three actions should you perform? (Each correct
answer presents part of the solution. Choose three.)
A. Define the class such that it inherits from the WeakReference class.
B. Define the class such that it implements the IDisposable interface.
C. Create a class destructor that calls methods on other objects to release the managed resources.
D. Create a class destructor that releases the unmanaged resources.
E. Create a Dispose method that calls System.GC.Collect to force garbage collection.
F. Create a Dispose method that releases unmanaged resources and calls methods on other objects to
release the managed resources.
Answer: BDF

Microsoft   070-536최신덤프   070-536덤프   070-536

NO.6 You are developing an application to perform mathematical calculations. You develop a class named
CalculationValues. You write a procedure named PerformCalculation that operates on an instance of the
class.
You need to ensure that the user interface of the application continues to respond while calculations are
being performed. You need to write a code segment that calls the Perform Calculation procedure to
achieve this goal.
Which code segment should you use?
A. public ref class CalculationValues {...};
public ref class Calculator {
public :
void PerformCalculation(Object= values) {}
};
public ref class ThreadTest{
private :
void DoWork (){
CalculationValues= myValues = gcnew CalculationValues(); Calculator = calc = gcnew Calculator();
Thread= newThread = gcnew Thread(
gcnew ParameterizedThreadStart(calc,
&Calculator::PerformCalculation));
newThread->Start(myValues);
}
};
B. public ref class CalculationValues {...};
public ref class Calculator {
public :
void PerformCalculation() {}
};
public ref class ThreadTest{
private :
void DoWork (){
CalculationValues= myValues = gcnew CalculationValues(); Calculator = calc = gcnew Calculator();
ThreadStart= delStart = gcnew
ThreadStart(calc, &Calculator::PerformCalculation);
Thread= newThread = gcnew Thread(delStart);
if (newThread->IsAlive) {
newThread->Start(myValues);
}
}
};
C. public ref class CalculationValues {...};
public ref class Calculator {
public :
void PerformCalculation(CalculationValues= values) {} };
public ref class ThreadTest{
private :
void DoWork (){
CalculationValues= myValues = gcnew CalculationValues(); Calculator = calc = gcnew Calculator();
Application::DoEvents();
calc->PerformCalculation(myValues);
Application::DoEvents();
}
};
D. public ref class CalculationValues {...};
public ref class Calculator {
public :
void PerformCalculation() {}
};
public ref class ThreadTest{
private :
void DoWork (){
CalculationValues= myValues = gcnew CalculationValues(); Calculator = calc = gcnew Calculator();
Thread= newThread = gcnew Thread(
gcnew ThreadStart(calc, &Calculator::PerformCalculation)); newThread->Start(myValues);
}
};
Answer: A

Microsoft   070-536 dump   070-536

NO.7 You are developing an application that receives events asynchronously. You create a WqlEventQuery
instance to specify the events and event conditions to which the application must respond. You also
create a ManagementEventWatcher instance to subscribe to events matching the query. You need to
identify the other actions you must perform before the application can receive events asynchronously.
Which two actions should you perform?
(Each correct answer presents part of the solution. Choose two.)
A. Start listening for events by calling the Start method of the ManagementEventWatcher.
B. Set up a listener for events by using the EventArrived event of the ManagementEventWatcher.
C. Use the WaitForNextEvent method of the ManagementEventWatcher to wait for the events.
D. Create an event handler class that has a method that receives an ObjectReadyEventArgs parameter.
E. Set up a listener for events by using the Stopped event of the ManagementEventWatcher.
Answer: AB

Microsoft   070-536   070-536

NO.8 You are testing a newly developed method named PersistToDB. This method accepts a parameter of
type EventLogEntry. This method does not return a value. You need to create a code segment that helps
you to test the method. The code segment must read entries from the application log of local computers
and then pass the entries on to the PersistToDB method. The code block must pass only events of type
Error or Warning from the source MySource to the PersistToDB method.
Which code segment should you use?
A. EventLog myLog = new EventLog("Application", ".");
foreach (EventLogEntry entry in myLog.Entries)
{
if (entry.Source == "MySource")
{
PersistToDB(entry);
}
}
B. EventLog myLog = new EventLog("Application", ".");
myLog.Source = "MySource";
foreach (EventLogEntry entry in myLog.Entries)
{
if (entry.EntryType == (EventLogEntryType.Error & EventLogEntryType.Warning)) {
PersistToDB(entry);
}
}
C. EventLog myLog = new EventLog("Application", ".");
foreach (EventLogEntry entry in myLog.Entries)
{
if (entry.Source == "MySource")
{
if (entry.EntryType == EventLogEntryType.Error || entry.EntryType == EventLogEntryType.Warning)
{
PersistToDB(entry);
}
}
}
D. EventLog myLog = new EventLog("Application", ".");
myLog.Source = "MySource";
foreach (EventLogEntry entry in myLog.Entries)
{
if (entry.EntryType == EventLogEntryType.Error || entry.EntryType == EventLogEntryType.Warning)
{
PersistToDB(entry);
}
}
Answer: C

Microsoft   070-536최신덤프   070-536자격증   070-536인증   070-536기출문제

NO.9 You are developing a method to hash data for later verification by using the MD5 algorithm. The data is
passed to your method as a byte array named message. You need to compute the hash of the incoming
parameter by using MD5. You also need to place the result into a byte array. Which code segment should
you use?
A. HashAlgorithm algo = HashAlgorithm.Create("MD5");
byte[] hash = algo.ComputeHash(message);
B. HashAlgorithm algo = HashAlgorithm.Create("MD5");
byte[] hash = BitConverter.GetBytes(algo.GetHashCode());
C. HashAlgorithm algo;
algo = HashAlgorithm.Create(message.ToString());
byte[] hash = algo.Hash;
D. HashAlgorithm algo = HashAlgorithm.Create("MD5");
byte[] hash = null;
algo.TransformBlock(message, 0, message.Length, hash, 0); "A Composite Solution With Just One Click"
- Certification Guaranteed 16 Microsoft 70-536 Exam
Answer: A

Microsoft   070-536   070-536   070-536 dumps

NO.10 Your application uses two threads, named thread One and thread Two. You need to modify the code to
prevent the execution of thread One until thread Two completes execution.
What should you do?
A. Configure threadOne to run at a lower priority.
B. Configure threadTwo to run at a higher priority.
C. Use a WaitCallback delegate to synchronize the threads.
D. Call the Sleep method of threadOne.
E. Call the SpinLock method of threadOne.
Answer: C

Microsoft   070-536인증   070-536기출문제   070-536자격증

NO.11 You use Reflection to obtain information about a method named My Method. You need to ascertain
whether MyMethod is accessible to a derived class. What should you do.?
A. Call the IsAssembly property of the MethodInfo class.
B. Call the IsVirtual property of the MethodInfo class.
C. Call the IsStatic property of the MethodInfo class.
D. Call the IsFamily property of the MethodInfo class.
Answer: D

Microsoft자료   070-536   070-536   070-536   070-536 pdf

NO.12 You need to create a dynamic assembly named MyAssembly. You also need to save the assembly to
disk.
Which code segment should you use?
A. AssemblyName myAssemblyName =
new AssemblyName();
AssemblyBuilder myAssemblyBuilder =
AppDomain.CurrentDomain.DefineDynamicAssembly
(myAssemblyName, AssemblyBuilderAccess.RunAndSave);
myAssemblyBuilder.Save("MyAssembly.dll");
B. AssemblyName myAssemblyName =
new AssemblyName();
myAssemblyName.Name = "MyAssembly";
AssemblyBuilder myAssemblyBuilder =
AppDomain.CurrentDomain.DefineDynamicAssembly
(myAssemblyName, AssemblyBuilderAccess.Save);
myAssemblyBuilder.Save("MyAssembly.dll");
C. AssemblyName myAssemblyName =
new AssemblyName("MyAssembly");
AssemblyBuilder myAssemblyBuilder =
AppDomain.CurrentDomain.DefineDynamicAssembly
(myAssemblyName, AssemblyBuilderAccess.Save);
myAssemblyBuilder.Save("c:\\MyAssembly.dll");
D. AssemblyName myAssemblyName =
new AssemblyName();
myAssemblyName.Name = "MyAssembly";
AssemblyBuilder myAssemblyBuilder =
AppDomain.CurrentDomain.DefineDynamicAssembly
(myAssemblyName, AssemblyBuilderAccess.Run);
myAssemblyBuilder.Save("MyAssembly.dll");
Answer: B

Microsoft최신덤프   070-536최신덤프   070-536   070-536   070-536자료   070-536자격증

NO.13 You are writing a custom dictionary. The custom-dictionary class is named MyDictionary. You need to
ensure that the dictionary is type safe. Which code segment should you use?
A. class MyDictionary : Dictionary<string, string>
B. class MyDictionary : HashTable
C. class MyDictionary : IDictionary
D. class MyDictionary { ... }
Dictionary<string, string> t = new Dictionary<string, string>(); MyDictionary dictionary = (MyDictionary)t;
Answer: A

Microsoft   070-536 dumps   070-536   070-536자격증

NO.14 You are working on a debug build of an application. You need to find the line of code that caused an
exception to be thrown. Which property of the Exception class should you use to achieve this goal?
A. Data
B. Message
C. StackTrace
D. Source
Answer: C

Microsoft   070-536   070-536시험문제   070-536덤프   070-536

NO.15 You create an application to send a message by e-mail. An SMTP server is available on the local subnet.
The SMTP server is named smtp.contoso.com.
To test the application, you use a source address, me@contoso.com, and a target address,
you@contoso.com.
You need to transmit the e-mail message.
Which code segment should you use?
A. MailAddress addrFrom =
new MailAddress("me@contoso.com", "Me");
MailAddress addrTo =
new MailAddress("you@contoso.com", "You");
MailMessage message = new MailMessage(addrFrom, addrTo); message.Subject = "Greetings!";
message.Body = "Test";
SocketInformation info = new SocketInformation();
Socket client = new Socket(info);
System.Text.ASCIIEncoding enc =
new System.Text.ASCIIEncoding();
byte[] msgBytes = enc.GetBytes(message.ToString());
client.Send(msgBytes);
B. MailAddress addrFrom = new MailAddress("me@contoso.com"); MailAddress addrTo = new
MailAddress("you@contoso.com"); MailMessage message = new MailMessage(addrFrom, addrTo);
message.Subject = "Greetings!";
message.Body = "Test";
SmtpClient client = new SmtpClient("smtp.contoso.com"); client.Send(message);
C. string strSmtpClient = "smtp.contoso.com";
string strFrom = "me@contoso.com";
string strTo = "you@contoso.com";
string strSubject = "Greetings!";
string strBody = "Test";
MailMessage msg =
"A Composite Solution With Just One Click" - Certification Guaranteed 7 Microsoft 70-536 Exam
new MailMessage(strFrom, strTo, strSubject, strSmtpClient);
D. MailAddress addrFrom =
new MailAddress("me@contoso.com", "Me");
MailAddress addrTo =
new MailAddress("you@contoso.com", "You");
MailMessage message = new MailMessage(addrFrom, addrTo); message.Subject = "Greetings!";
message.Body = "Test";
message.Dispose();
Answer: B

Microsoft pdf   070-536최신덤프   070-536   070-536   070-536최신덤프

NO.16 You write the following code:
public delegate void FaxDocs(object sender, FaxArgs args);
You need to create an event that will invoke FaxDocs. Which code segment should you use?
A. public static event FaxDocs Fax;
B. public static event Fax FaxDocs;
C. public class FaxArgs : EventArgs{
private string coverPageInfo;
public FaxArgs(string coverInfo)
{
this.coverPageInfo = coverPageInfo;
}
public string CoverPageInformation
{
get { return this.coverPageInfo; }
}
}
D. public class FaxArgs : EventArgs
{
private string coverPageInfo;
public string CoverPageInformation
{
get { return this.coverPageInfo; }
}
}
Answer: A

Microsoft기출문제   070-536   070-536시험문제   070-536   070-536 dump

NO.17 You need to create a class definition that is interoperable along with COM.
You need to ensure that COM applications can create instances of the class and can call the GetAddress
method.
Which code segment should you use?
A. public class Customer{
string addressString;
public Customer(string address)
{
addressString = address;
}
public string GetAddress()
{
return addressString;
}
}
B. public class Customer {
static string addressString;
public Customer() { }
public static string GetAddress()
{
return addressString;
}
}
C. public class Customer {
string addressString;
public Customer() { }
public string GetAddress()
{
return addressString;
}
}
D. public class Customer {
string addressString;
public Customer() { }
internal string GetAddress()
{
return addressString;
}
}
Answer: C

Microsoft시험문제   070-536기출문제   070-536   070-536 dump   070-536

NO.18 You are developing a custom-collection class. You need to create a method in your class. You need to
ensure that the method you create in your class returns a type that is compatible with the Foreach
statement. Which criterion should the method meet?
A. The method must return a type of either IEnumerator or IEnumerable.
B. The method must return a type of IComparable.
C. The method must explicitly contain a collection.
D. The method must be the only iterator in the class.
Answer: A

Microsoft   070-536   070-536최신덤프   070-536   070-536

NO.19 You are creating an assembly named Assembly1. Assembly1 contains a public method. The global
cache contains a second assembly named Assembly2. You must ensure that the public method is only
called from Assembly2. Which permission class should you use?
A. GacIdentityPermission
B. StrongNameIdentityPermission
C. DataProtectionPermission
D. PublisherIdentityPermission
"A Composite Solution With Just One Click" - Certification Guaranteed 6 Microsoft 70-536 Exam
Answer: B

Microsoft dumps   070-536   070-536   070-536 dump

NO.20 You are developing a method to hash data with the Secure Hash Algorithm. The data is passed to your
method as a byte array named message. You need to compute the hash of the incoming parameter by
using SHA1. You also need to place the result into a byte array named hash. Which code segment should
you use?
A. SHA1 sha = new SHA1CryptoServiceProvider();
byte[] hash = null;
sha.TransformBlock(message, 0, message.Length, hash, 0);
B. SHA1 sha = new SHA1CryptoServiceProvider();
byte[] hash = BitConverter.GetBytes(sha.GetHashCode());
C. SHA1 sha = new SHA1CryptoServiceProvider();
byte[] hash = sha.ComputeHash(message);
D. SHA1 sha = new SHA1CryptoServiceProvider();
sha.GetHashCode();
byte[] hash = sha.Hash;
Answer: C

Microsoft시험문제   070-536인증   070-536

Microsoft인증 070-536시험은 등록하였는데 시험준비는 아직이라구요? Microsoft인증 070-536시험일이 다가오고 있는데 공부를 하지 않아 두려워 하고 계시는 분들은 이 글을 보는 순간 시험패스에 자신을 가지게 될것입니다. 시험준비 시간이 적다고 하여 패스할수 없는건 아닙니다. ITExamDump의Microsoft인증 070-536덤프와의 근사한 만남이Microsoft인증 070-536패스에 화이팅을 불러드립니다. 덤프에 있는 문제만 공부하면 되기에 시험일이 며칠뒤라도 시험패스는 문제없습니다. 더는 공부하지 않은 자신을 원망하지 마시고 결단성있게ITExamDump의Microsoft인증 070-536덤프로 시험패스에 고고싱하세요.