ITExamDump 에서는 최선을 다해 여러분이IBM C2180-605인증시험을 패스하도록 도울 것이며 여러분은 ITExamDump에서IBM C2180-605덤프의 일부분의 문제와 답을 무료로 다운받으실 수 잇습니다. ITExamDump 선택함으로IBM C2180-605인증시험통과는 물론ITExamDump 제공하는 일년무료 업데이트서비스를 제공받을 수 있으며 ITExamDump의 인증덤프로 시험에서 떨어졌다면 100% 덤프비용 전액환불을 약속 드립니다.
ITExamDump는 많은 IT인사들이IBM인증시험에 참가하고 완벽한C2180-605인증시험자료로 응시하여 안전하게IBM C2180-605인증시험자격증 취득하게 하는 사이트입니다. Pass4Tes의 자료들은 모두 우리의 전문가들이 연구와 노력 하에 만들어진 것이며.그들은 자기만의 지식과 몇 년간의 연구 경험으로 퍼펙트하게 만들었습니다.우리 덤프들은 품질은 보장하며 갱신 또한 아주 빠릅니다.우리의 덤프는 모두 실제시험과 유사하거나 혹은 같은 문제들임을 약속합니다.ITExamDump는 100% 한번에 꼭 고난의도인IBM인증C2180-605시험을 패스하여 여러분의 사업에 많은 도움을 드리겠습니다.
ITExamDump 의 IBM인증 C2180-605시험에 도전장을 던지셨나요? 현황에 만족하지 않고 열심히 하는 모습에 박수를 보내드립니다. IBM인증 C2180-605시험을 학원등록하지 않고 많은 공부자료 필요없이ITExamDump 에서 제공해드리는 IBM인증 C2180-605덤프만으로도 가능합니다. 수많은 분들이 검증한IBM인증 C2180-605덤프는 시장에서 가장 최신버전입니다.가격도 친근하구요.
IBM인증 C2180-605시험은 빨리 패스해야 되는데 어디서부터 어떻게 시험준비를 시작해야 하는지 갈피를 잡을수 없는 분들은ITExamDump가 도와드립니다. ITExamDump의 IBM인증 C2180-605덤프만 공부하면 시험패스에 자신이 생겨 불안한 상태에서 벗어날수 있습니다.덤프는 시장에서 가장 최신버전이기에 최신 시험문제의 모든 시험범위와 시험유형을 커버하여IBM인증 C2180-605시험을 쉽게 패스하여 자격증을 취득하여 찬란한 미래에 더 가깝도록 도와드립니다.
ITExamDump의 IBM인증 C2180-605덤프는 다른 덤프판매 사이트보다 저렴한 가격으로 여러분들께 가볍게 다가갑니다. IBM인증 C2180-605덤프는 기출문제와 예상문제로 되어있어 시험패스는 시간문제뿐입니다.
인테넷에 검색하면 IBM C2180-605시험덤프공부자료가 헤아릴수 없을 정도로 많이 검색됩니다. 그중에서ITExamDump의IBM C2180-605제품이 인지도가 가장 높고 가장 안전하게 시험을 패스하도록 지름길이 되어드릴수 있습니다.
시험 번호/코드: C2180-605
시험 이름: IBM (IBM WebSphere Enterprise Service Bus V7.0,Integration Development)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 114 문항
업데이트: 2014-03-11
C2180-605 덤프무료샘플다운로드하기: http://www.itexamdump.com/C2180-605.html
NO.1 An integration developer has developed a new mediation flow and wants to test it on a new embedded
server profile. How should the integration developer proceed in order to perform this testing as efficiently
as possible?
A. Build the EAR file inWebSphere Integration Developer, then deploy it via serviceDeploy on the server.
B. Build the EAR file inWebSphere Integration Developer, then deploy it via the server's administrative
console.
C. In WebSphere Integration Developer, in the Servers tab, add a new server and enter the connection
details of the server.
D. InWebSphere Integration Developer, import the server via File>Import>Server and enter the
connection details of the server.
Answer: C
IBM C2180-605 C2180-605 dumps C2180-605 C2180-605 C2180-605
NO.2 Two integration developers are working on the same mediation module using WebSphere Integration
Developer. The module code needs to be merged at the end of each day so that the developers start at
the same completion level next day. Which of the following options is the correct way to achieve this with
respect to the versioning support in WebSphere Integration Developer? The developers can:
A. continue working on their individual versions of the projects and user 'compare projects' feature at the
beginning of each day.
B. continue working on their individual versions of the projects and merge them using a source control tool
at the end of each day.
C. maintain multiple versions of the projects in their respective workspaces and use the 'merge projects'
feature at the end of each day.
D. maintain multiple versions of the projects in their respective workspaces and use the
'synchronize projects' feature at the end of each day.
Answer: B
IBM인증 C2180-605 C2180-605자료 C2180-605
NO.3 Refer to the Exhibit.
The Assembly Diagram represents an existing StockQuote mediation module. The mediation module
must be enhanced to create a record in a billing system whenever a stock quote is executed. What must
be done to the Assembly Diagram to implement the enhancement?
A. Add a newBillingService import with an appropriate interface.
Add a new reference to the StockQuote mediation flow component.
Wire the new reference to the new BillingService import.
B. Add a newBillingService export with an appropriate interface.
Add a new reference to the StockQuote mediation flow component.
Wire the new reference to the new BillingService export.
C. Add a newBillingService import with an appropriate reference.
Add a new interface to the mediation flow component.
Wire the new interface to the new BillingService import.
D. Add a newBillingService export with an appropriate reference.
Add a new interface to the mediation flow component.
Wire the new interface to the new BillingService export.
Answer: A
IBM덤프 C2180-605인증 C2180-605 C2180-605기출문제 C2180-605
NO.4 Refer to the Exhibits.
An integration developer needs to implement an application to manage the reception of resumes for a job
application. The application must allow the applicant to attach a photo in jpeg format. The integration
developer decides to create a mediation module exposed through a Web Service Export binding using
SOAP with Referenced Attachments to save the photo to a database and send the rest of the data to a
business process for further processing. Exhibit A shows the assembly diagram of the mediation module.
Exhibit B shows the interface of the Export component of the mediation module in the interface editor.
Which actions does the integration developer need to execute in the interface editor above, in order to
correctly configure the Web Service Export binding to handle SOAP with Referenced Attachments?
A. Leave the binding style to 'document literal wrapped', change the 'attachment' input type to
'base64Binary'.A.Leave the binding style to 'document literal wrapped', change the 'attachment' input type
to 'base64Binary'.
B. Leave the binding style to 'document literal wrapped', change the 'attachment' input type to 'hexBinary',
add in the Property editor the binary content type field 'image/jpeg' for the 'attachment' input.
C. Leave the binding style to 'document literal wrapped', change the 'attachment' input type to 'hexBinary',
add in the Property editor the binary content type field 'image/jpeg' for the 'attachment' input.
D. Leave the binding style to 'document literal wrapped', change the 'attachment' input type to 'hexBinary',
add in the Property editor the binary content type field 'image/jpeg' for the 'attachment' input.
E. Change the binding style to 'document literal non wrapped', change the 'attachment' input type to
'hexBinary'.C.Change the binding style to 'document literal non wrapped', change the 'attachment' input
type to 'hexBinary'.
F. Change the binding style to 'document literal non wrapped', change the 'attachment' input type to
'hexBinary', add in the Property editor the binary content type field 'image/jpeg' for the 'attachment' input.
G. Change the binding style to 'document literal non wrapped', change the 'attachment' input type to
'hexBinary', add in the Property editor the binary content type field 'image/jpeg' for the 'attachment' input.
H. Change the binding style to 'document literal non wrapped', change the 'attachment' input type to
'hexBinary', add in the Property editor the binary content type field 'image/jpeg' for the 'attachment' input.
Answer: F,G,H
IBM C2180-605 C2180-605 C2180-605기출문제
NO.5 A PurchaseOrder business object and a SalesOrder business object inherit from an abstract Order
business object. Both PurchaseOrder and SalesOrder objects require an orderDate property.
However, PurchaseOrder requires an orderType property that is not required by SalesOrder. What is the
BEST way to model the objects?
A. Define theorderDate property in the abstract Order
Define the orderType property in PurchaseOrder
B. Define theorderDate property in the abstract Order
Define the orderType property in the abstract Order
C. Define theorderDate property in PurchaseOrder and SalesOrder
Define the orderType property in PurchaseOrder
D. Define theorderDate property in PurchaseOrder and SalesOrder
Define the orderType property in the abstract Order
Answer: A
IBM시험문제 C2180-605 C2180-605 C2180-605인증 C2180-605
NO.6 An integration developer is designing an XML map that combines the firstName and lastName
elements of the source into a single fullName element in the target. In addition, the fullName element
must be formatted with the lastName first, followed by a comma and then the firstName.
Which transform type would be the most appropriate for this situation?
A. Move
B. Concat
C. Append
D. Assign
Answer: B
IBM C2180-605 dumps C2180-605
NO.7 An integration developer is developing a mediation flow and wants to stop the execution of a path in
the flow. The developer has to choose between a Stop and a Fail mediation primitive. Which of the
following is the correct option to consider while making a choice between the two?
A. A Stop primitive would stop the execution, throw an exception and may rollback global
transactions if configured; a Fail primitive would stop the execution and consume the message silently.
B. A Stop primitive would stop the execution and consume the message silently; a Fail primitive would
stop the execution, throw an exception and may rollback global transactions if configured.
C. A Stop primitive would stop the execution, throw an exception and consume the message; a
Fail primitive would stop the execution and may return the message to the downstream primitive through
its output terminal if configured.
D. A Stop primitive would stop the execution and may return the message to the downstream primitive
through its output terminal if configured; a Fail primitive would stop the execution, throw an exception and
may return the message to the downstream primitive through its output terminal if configured.
Answer: B
IBM C2180-605시험문제 C2180-605최신덤프 C2180-605
NO.8 A new version of a common business object currently defined in a shared library is required for a new
mediation module. Which of the following should be done to ensure that older modules are not
immediately affected by the change and both versions of the business object are available to all modules?
A. Create the new version of the business object using a different name in the shared library.
B. Create the new version of the business object using the same name in the new mediation module
without modifying the shared library or the other mediation modules.
C. Create the new version of the business object using a different name in the new mediation module
without modifying the shared library or the other mediation modules.
D. Move the old version of the common business object to each existing dependent mediation module,
then create the new version of the business object in the new mediation module.
Answer: A
IBM pdf C2180-605 C2180-605 C2180-605최신덤프
NO.9 An integration developer is developing a mediation flow component using WebSphere Adapters. It is
observed that the events are being delivered by multiple threads on several channels simultaneously.
What type of event delivery mechanism is used?
A. Ordered
B. Unordered
C. Persistent
D. Non-persistent
Answer: B
IBM시험문제 C2180-605 C2180-605최신덤프 C2180-605자격증
NO.10 An integration developer is developing a mediation flow component to integrate PeopleSoft Enterprise.
The integration developer has identified WebSphere Adapter for PeopleSoft Enterprise for this integration.
Which technology specification is implemented by this adapter?
A. Java EE Connector Architecture (JCA)
B. Java EE Component Architecture (JCA)
C. Java EE Connectivity Architecture (JCA)
D. Java EE Communication Architecture (JCA)
Answer: A
IBM dump C2180-605 C2180-605최신덤프
NO.11 An integration developer is implementing a custom mediation primitive. The primitive has 3 out
terminals configured, Terminal1, Terminal2, and Terminal3. In the custom code, the developer wants to
propagate the original service message object (smo) to Terminal2. How should the developer implement
this in the code?
A. out.Terminal2(smo);
B. Terminal2.fire(smo);
C. fire(smo,Terminal2);
D. fire.out(smo,Terminal2);
Answer: B
IBM C2180-605 C2180-605자격증
NO.12 An integration developer is developing a mediation module using the WebSphere Integration Developer.
The mediation module interacts with different databases, via the database lookup mediation primitive and
an Enterprise Information system (EIS) binding. It is expected that during the lifetime of this solution, the
databases connection details will change. The customer wants to avoid downtime of the applications as
much as possible. What is the BEST way for the integration developer to implement a solution so that
when database connection details change, downtime is minimized?
A. Update the details of the database connections,then deploy the updated EAR file.
B. Define the various database connection details asWebSphere Variables. When a change in the
connection details occurs, update the WebSphere Variables on the server and restart the server.
C. Define the various database connections used as JNDI names. When a change in the
connection details occurs, update the JNDI details on the server and restart the application.
D. Define a properties file for the application to load on startup. When a change in the connection details
occurs, update the details in the properties file and restart the application.
Answer: C
IBM dumps C2180-605자격증 C2180-605
NO.13 The integration developer has an existing mediation flow that was developed using WebSphere
Integration Developer V6.2. The developer would like to take advantage of functionality in new mediation
primitives of WebSphere Integration Developer V7.0 to enhance the mediation flow design. What should
the integration developer do to migrate project artifacts from WebSphere Integration Developer V6.2 to
WebSphere Integration Developer V7.0? From WebSphere Integration Developer V6.2, export the
artifacts:
A. into a JAR file.Import the JAR file into the WebSphere Integration Developer V7.0, which will
automatically migrate the project.
B. as an EAR file.Import the EAR file into WebSphere Integration Developer V7.0, which will automatically
migrate the project.
C. into a Project Interchange (PI) file. Import the PI file into WebSphere Integration Developer V7.0. Then
use the migration wizard to complete the process.
D. into an Eclipse Product.Import the Eclipse file into WebSphere Integration Developer V7.0. Then use
the migration wizard to complete the process.
Answer: C
IBM C2180-605 C2180-605인증 C2180-605 dump C2180-605기출문제 C2180-605 dumps
NO.14 A client wants to invoke a mediation module that contains a mediation flow. Which of the following
export bindings with Request-Response interface will ensure that the mediation flow is invoked
asynchronously with callback by the client?
A. HTTP
B. Web services (SOAP/JMS)
C. Web services (SOAP/HTTP)
D. WebSphere MQ or WebSphere MQ-JMS
Answer: D
IBM C2180-605 C2180-605최신덤프 C2180-605인증
NO.15 An integration developer is using serviceDeploy command to generate J2EE application EAR files
from SCA modules. The serviceDeploy command expects an input file in which of the following formats?
A. .gz
B. .jar
C. .rar
D. .tar
E. .zip
Answer: B,E
IBM C2180-605 pdf C2180-605 C2180-605덤프
NO.16 An integration developer wants to access a database table on a DB2 database installed on an AIX
system using a JDBC Adapter. Using the configuration wizard of the JDBC Outbound Adapter import, the
integration developer is prompted for JAR files. Which kind of JAR files are required?
A. AIX specific JAR files
B. JDBC standard JAR files
C. DB2 specific JAR files
D. DB2 and AIX specific JAR files
Answer: C
IBM자격증 C2180-605 C2180-605
NO.17 A mediation module must be designed to participate in a transaction initiated by a client component.
Which of the following settings should be used by the integration developer to meet the transaction
requirements for the mediation module?
A. Set the Transaction qualifier to False and the Join transaction qualifier to True.
B. Set the Transaction qualifier to Global and the Join transaction qualifier to True.
C. Set the Transaction qualifier to Local and the Join transaction qualifier to False.
D. Set the Transaction qualifier to True and the Join transaction qualifier toTrue.
Answer: B
IBM C2180-605 dumps C2180-605기출문제 C2180-605최신덤프 C2180-605자료
NO.18 An integration developer has been tasked to develop a mediation module that integrates a legacy J2EE
application deployed on a remote server. The legacy application is exposed through an EJB facade and
the integration developer decides to use an EJB import. What is the most suitable approach to configure it?
The integration developer should:
A. add the corresponding EJB client project to the module dependencies and select the EJB local
interface for the import.
B. import the corresponding EJB client project into the workspace and select the EJB remote interface for
the import.
C. create a WSDL interface with the same operations as the EJB interface, select it as the import interface
and add the EJB JNDI Name in the binding section.
D. use the external service wizard to point to the EJB through its IIOP URL and the wizard
automatically creates the interface and the business objects for the import.
Answer: B
IBM시험문제 C2180-605 pdf C2180-605
NO.19 An integration developer wants to make some of the properties of the mediation primitives configurable
at runtime. Which of the following properties can be promoted to be visible to be visible within the
Administrative Console (Integrated Solutions Console)?
A. 'Root' of Event Emitter
B. 'Handler' of Message Logger
C. 'Table name' of Database Lookup
D. 'Binding Type' of Endpoint Lookup
E. 'Invocation Style' of Service Invoke
Answer: C,D
IBM dump C2180-605최신덤프 C2180-605 C2180-605 C2180-605 dump
NO.20 An integration developer has deployed different versions of the same SCA module to a server using
administrative console. Which of the following statements is TRUE about any subsequently deployed
versions of the module?
A. Previous versions of the module are cached in memory.
B. Previous versions of the module are overwritten by the new version of the module.
C. A new version of the module replaces the last version of the module.
D. A new version of the module does not replace any previous versions of the module.
Answer: D
IBM C2180-605 C2180-605 C2180-605
ITexamdump의 JN0-692덤프의 VCE테스트프로그램과 70-464덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 642-996시험에 대비한 고품질 덤프와 HP0-J62시험 최신버전덤프를 제공해드립니다. 최고품질 70-486시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기