이 글을 보시게 된다면SASInstitute인증 A00-202시험패스를 꿈꾸고 있는 분이라고 믿습니다. SASInstitute인증 A00-202시험공부를 아직 시작하지 않으셨다면 망설이지 마시고ITExamDump의SASInstitute인증 A00-202덤프를 마련하여 공부를 시작해 보세요. 이렇게 착한 가격에 이정도 품질의 덤프자료는 찾기 힘들것입니다. ITExamDump의SASInstitute인증 A00-202덤프는 고객님께서 SASInstitute인증 A00-202시험을 패스하는 필수품입니다.
IT업계에 종사하는 분이라면 국제적으로 인정받는 IT인증시험에 도전하여 자격증을 취득하셔야 합니다. ITExamDump의 SASInstitute인증 A00-202덤프는 이 시험에 참가한 IT인사들의 검증을 받은 최신 시험대비 공부자료입니다. ITExamDump의 SASInstitute인증 A00-202덤프로 시험을 쉽게 패스하여 자격증을 취득하면 승진이나 연봉인상에 많은 편리를 가져다드립니다. 저희는 항상 여러분들의 곁을 지켜줄것입니다.
SASInstitute인증 A00-202시험을 어떻게 패스할가 고민그만하고ITExamDump의SASInstitute 인증A00-202시험대비 덤프를 데려가 주세요.가격이 착한데 비해 너무나 훌륭한 덤프품질과 높은 적중율, ITExamDump가 아닌 다른곳에서 찾아볼수 없는 혜택입니다.
시험 번호/코드: A00-202
시험 이름: SASInstitute (SAS advanced programming exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 85 문항
업데이트: 2014-01-14
자신을 부단히 업그레이드하려면 많은 노력이 필요합니다. IT업종 종사자라면 국제승인 IT인증자격증을 취득하는것이 자신을 업그레이드하는것과 같습니다. SASInstitute인증 A00-202시험을 패스하여 원하는 자격증을 취득하려면ITExamDump의SASInstitute인증 A00-202덤프를 추천해드립니다. 하루빨리 덤프를 공부하여 자격증 부자가 되세요.
A00-202 덤프무료샘플다운로드하기: http://www.itexamdump.com/A00-202.html
NO.1 Given the following SAS statement: %let idcode = Prod567; Which one of the following statements
stores the value 567 in the macro variable CODENUM?
A. %let codenum = substr(&idcode,length(&idcode)-2);
B. %let codenum = substr(&idcode,length(&idcode)-3);
C. %let codenum = %substr(&idcode,%length(&idcode)-2);
D. %let codenum = %substr(&idcode,%length(&idcode)-3);
Answer: C
SASInstitute인증 A00-202 dumps A00-202 A00-202 pdf A00-202 dumps
NO.2 The variable attributes of SAS data sets ONE and TWO are shown below: ONE TWO # Variable Type
Len Pos # Variable Type Len Pos 2 sales Num 8 8 2 budget Num 8 8 1 year Num 8 0 3 sales Char 8 16 1
year Num 8 0 Data set ONE contains 100 observations. Data set TWO contains 50 observations. Both
data sets are sorted by the variable YEAR. The following SAS program is submitted: data three;
merge one two; by year; run; Which one of the following is the result of the program execution?
A. No messages are written to the SAS log.
B. ERROR and WARNING messages are written to the SAS log.
C. Data set THREE is created with two variables and 50 observations.
D. Data set THREE is created with three variables and 100 observations.
Answer: B
SASInstitute A00-202인증 A00-202덤프 A00-202 dump
NO.3 Which of the following statement(s) in the DATASETS procedure alters the name of a SAS data set
stored in a SAS data library?
A. RENAME statement only
B. CHANGE statement only
C. MODIFY and RENAME statements
D. MODIFY and CHANGE statements
Answer: B
SASInstitute A00-202 A00-202
NO.4 The following SAS program is submitted: %let value = 9; %let value2 = 5; %let newval = %eval(&value
/ &value2); Which one of the following is the resulting value of the macro variable NEWVAL?
A. 1
B. 2
C. 1.8
D. null
Answer:A
SASInstitute pdf A00-202 A00-202 A00-202기출문제 A00-202 dump
NO.5 Which one of the following statements is true?
A. The WHERE statement can be executed conditionally as part of an IF statement.
B. The WHERE statement selects observations before they are brought into the PDV.
C. The subsetting IF statement works on observations before they are read into the PDV.
D. The WHERE and subsetting IF statements can be used interchangeably in all SAS programs.
Answer: B
SASInstitute dump A00-202 A00-202
NO.6 Consider the following SAS log: 229 data sasuser.ranch sasuser.condo / view = sasuser.ranch;
230 set sasuser.houses; 231 if style = 'RANCH' then output sasuser.ranch; 232 else if style = 'CONDO'
then output sasuser.condo; 233 run; NOTE: DATA STEP view saved on file SASUSER.RANCH. NOTE: A
stored DATA STEP view cannot run under a different operating system. 234 235 proc print data =
sasuser.condo; ERROR: File SASUSER.CONDO.DATA does not exist. 236 run; NOTE: The SAS System
stopped processing this step because of errors. Which one of the following explains why the PRINT
procedure fails?
A. SASUSER.CONDO is a stored DATA step program.
B. A SAS data file and SAS data view cannot be created in the same DATA step.
C. A second VIEW=SASUSER.CONDO option was omitted on the DATA statement.
D. The view SASUSER.RANCH must be processed before SASUSER.CONDO is created.
Answer: D
SASInstitute A00-202 pdf A00-202 pdf A00-202
NO.7 The SAS data set TEMP has the following distribution of values for variable A: A Frequency 1 500,000
2 500,000 6 7,000,000
3,000 Which one of the following SAS programs requires the least CPU time to be processed?
A. data new; set temp; if a = 8 then b = 'Small '; else if a in(1, 2) then b = 'Medium'; else if a = 6 then b =
'Large'; run;
B. data new; set temp; if a in (1, 2) then b = 'Medium'; else if a = 8 then b = 'Small'; else if a = 6 then b =
'Large'; run;
C. data new; set temp; if a = 6 then b = 'Large '; else if a in (1, 2) then b = 'Medium'; else if a = 8 then b =
'Small';
D. data new; set temp; if a = 6 then b = 'Large ';
if a in (1, 2) then b = 'Small'; run;
Answer: C
SASInstitute시험문제 A00-202 dump A00-202 dump A00-202 pdf
NO.8 The following SAS code is submitted: %macro houses(dsn = houses,sub = RANCH); data &dsn; set
sasuser.houses; if style = "&sub"; run; %mend; %houses(sub = SPLIT)
%houses(dsn = ranch) %houses(sub = TWOSTORY) Which one of the following is the value of the
automatic macro variable SYSLAST?
A. work.ranch
B. work.houses
C. WORK.RANCH
D. WORK.HOUSES
Answer: D
SASInstitute A00-202 A00-202자료 A00-202시험문제 A00-202
NO.9 Given the following SAS data sets ONE and TWO:
ONE TWO YEAR QTR BUDGET YEAR QTR SALES
2001 3 500 2001 4 300 2001 4 400 2002 1 600 ] 2002 1 700 The following SAS program is submitted:
proc sql; select one.*, sales from one, two
where one.year = two.year; quit; Which one of the following reports is generated?
A. YEAR QTR BUDGET SALES
2001 4 400 300 2002 1 700 600
B. YEAR QTR BUDGET SALES
2001 3 500 . 2001 4 400 300 2002 1 700 600
C. YEAR QTR BUDGET SALES
2001 3 500 300 2001 4 400 300 2002 1 700 600
D. YEAR QTR BUDGET SALES
2001 3 500 300 2001 4 400 300 2002 1 700 300 2001 3 500 600 2001 4 400 600 2002 1 700 600
Answer: C
SASInstitute자격증 A00-202인증 A00-202 A00-202 A00-202
NO.10 Given the following SAS data sets ONE and TWO: ONE TWO NUM COUNTRY NUM CITY
______________ ______________
1 CANADA 3
BERLIN
2
FRANCE 5
TOKYO
3 GERMANY 4 BELGIUM
5 JAPAN
The following SAS program is submitted: proc sql; select country from one where not exists
(select * from two where one.num = two.num); quit; Which one of the following reports is generated?
A. COUNTRY
GERMANY JAPAN
B. COUNTRY FRANCE BELGIUM
C. COUNTRY
CANADA FRANCE BELGIUM
D. COUNTRY
CANADA FRANCE GERMANY
Answer: C
SASInstitute A00-202 pdf A00-202 A00-202시험문제 A00-202
NO.11 The following SAS program is submitted: data one; do i = 1 to 10; ptobs = ceil(ranuni(0) * totobs); set
temp point = ptobs nobs = totobs; output; end; stop; run; The SAS data set TEMP contains 2,500,000
observations. Which one of the following represents the possible values for PTOBS?
A. any integer between 1 and 10
B. any real number between 0 and 1
C. any integer between 1 and 2,500,000
D. any real number between 1 and 2,500,000
Answer: C
SASInstitute A00-202 A00-202 dump A00-202 pdf A00-202자격증
NO.12 Which one of the following is an advantage of creating and using a SAS DATA step view?
A. It can store an index.
B. It always accesses the most current data.
C. It works quickly through multiple passes of the data.
D. It is useful when the underlying data file structure changes.
Answer: B
SASInstitute최신덤프 A00-202 A00-202 A00-202 dumps A00-202최신덤프
NO.13 Given the following SAS data set ONE: ONE REP COST
SMITH
200
SMITH
400
JONES
100
SMITH 600
JONES
100
JONES
200
JONES
400
SMITH
800
JONES
100
JONES 300
The following SAS program is submitted: proc sql; select rep, avg(cost) as AVERAGE from one group by
rep having avg(cost) > (select avg(cost) from one); quit; Which one of the following reports is generated?
A. REP AVERAGE
JONES 200
B. REP AVERAGE
JONES 320
C. REP AVERAGE
SMITH 320
D. REP AVERAGE
SMITH 500
Answer: D
SASInstitute인증 A00-202기출문제 A00-202 A00-202최신덤프
NO.14 The following SAS program is submitted: proc sort data = sales tagsort; by month year; run; Which of
the following resource(s) is the TAGSORT option reducing?
A. I/O usage only
B. CPU usage only
C. I/O and CPU usage
D. temporary disk usage
Answer: D
SASInstitute인증 A00-202 dumps A00-202 A00-202인증 A00-202 dumps
NO.15 Given the following SAS data sets ONE and TWO: ONE TWO YEAR QTR BUDGET YEAR QTR
SALES
2001 3 500 2001 4 300 2001 4 400 2002 1 600 2002 1 700
The following SAS program is submitted: proc sql; select one.*, sales from one, two; quit; Which one of
the following reports is generated?
A. YEAR QTR BUDGET SALES
2001 4 400 300 2002 1 700 600
B. YEAR QTR BUDGET SALES
2001 3 500 . 2001 4 400 300 2002 1 700 600
C. YEAR QTR BUDGET SALES
2001 3 500 300 2001 4 400 300 2002 1 700 600
D. YEAR QTR BUDGET SALES
2001 3 500 300 2001 4 400 300 2002 1 700 300 2001 3 500 600 2001 4 400 600 2002 1 700 600
Answer: D
SASInstitute시험문제 A00-202 pdf A00-202 dumps A00-202기출문제
NO.16 Which one of the following options controls the pagesize of a SAS data set?
A. SIZE=
B. BUFNO=
C. BUFSIZE=
D. PAGESIZE=
Answer: C
SASInstitute A00-202 A00-202최신덤프 A00-202자격증
NO.17 The following SAS program is submitted: data new (bufsize = 6144 bufno = 4); set old; run; Which one
of the following describes the difference between the usage of BUFSIZE= and BUFNO= options?
A. BUFSIZE= specifies the size of the input buffer in bytes; BUFNO= specifies the number of input
buffers.
B. BUFSIZE= specifies the size of the output buffer in bytes; BUFNO= specifies the number of output
buffers.
C. BUFSIZE= specifies the size of the output buffer in kilobytes; BUFNO= specifies the number of input
buffers.
D. BUFSIZE= specifies the size of the output buffer in kilobytes; BUFNO= specifies the number of output
buffers.
Answer: B
SASInstitute pdf A00-202 A00-202 A00-202 A00-202
NO.18 The following SAS program is submitted: <insert statement here>; %let development = ontime; proc
print data = sasuser.highway; title "For &dept"; title2 "This project was completed &development"; run;
Which one of the following statements completes the above and resolves title1 to "For
research&development"?
A. %let dept = %str(research&development);
B. %let dept = %str(research%&development);
C. %let dept = %nrstr(research&development);
D. %let dept = %nrstr(research%&development);
Answer: C
SASInstitute A00-202최신덤프 A00-202
NO.19 Which one of the following programs contains a syntax error?
A. proc sql; select product.*, cost.unitcost, sales.quantity
from product p, cost c, sales s where p.item = c.item and p.item = s.item; quit;
B. proc sql; select product.*, cost.unitcost, sales.quantity from product, cost, sales where product.item =
cost.item and product.item = sales.item; quit;
C. proc sql; select p.*, c.unitcost, s.quantity from product as p, cost as c, sales as s where p.item = c.item
and p.item = s.item; quit;
D. proc sql; select p.*, c.unitcost, s.quantity from product, cost, sales where product.item = cost.item and
product.item = sales.item; quit;
Answer: D
SASInstitute자료 A00-202 A00-202 A00-202
NO.20 Given the following SAS data set ONE: ONE NUM VAR
1. 2 B 3C Which one of the following SQL programs deletes the SAS data set ONE?
A. proc sql; delete table one; quit;
B. proc sql; alter table one drop num, var; quit;
C. proc sql; drop table one; quit;
D. proc sql; delete from one; quit;
Answer: C
SASInstitute A00-202인증 A00-202 A00-202
ITexamdump의 000-N45덤프의 VCE테스트프로그램과 EX0-101덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-273시험에 대비한 고품질 덤프와 200-101시험 최신버전덤프를 제공해드립니다. 최고품질 ICGB시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기