ITExamDump의Microsoft인증 070-659 덤프는 수많은 시험준비 공부자료 중 가장 믿음직합니다. ITExamDump의 인지도는 업계에 널리 알려져 있습니다. Microsoft인증 070-659덤프로Microsoft인증 070-659시험을 준비하여 한방에 시험패스한 분이 너무나도 많습니다. Microsoft인증 070-659덤프는 실제Microsoft인증 070-659시험문제에 초점을 맞추어 제작한 최신버전 덤프로서 시험패스율이 100%에 달합니다.
빨리 ITExamDump 덤프를 장바구니에 넣으시죠. 그러면 100프로 자신감으로 응시하셔서 한번에 안전하게 패스하실 수 있습니다. 단 한번으로Microsoft 070-659인증시험을 패스한다…… 여러분은 절대 후회할 일 없습니다.
발달한 네트웨크 시대에 인터넷에 검색하면 많은Microsoft인증 070-659시험공부자료가 검색되어 어느 자료로 시험준비를 해야 할지 망서이게 됩니다. 이 글을 보는 순간 다른 공부자료는 잊고ITExamDump의Microsoft인증 070-659시험준비 덤프를 주목하세요. 최강 IT전문가팀이 가장 최근의Microsoft인증 070-659 실제시험 문제를 연구하여 만든Microsoft인증 070-659덤프는 기출문제와 예상문제의 모음 공부자료입니다. ITExamDump의Microsoft인증 070-659덤프만 공부하면 시험패스의 높은 산을 넘을수 있습니다.
우리ITExamDump 는 많은IT전문가들로 구성되었습니다. 우리의 문제와 답들은 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다. 거이 100%의 정확도를 자랑하고 있습니다. 아마 많은 유사한 사이트들도 많습니다. 이러한 사이트에서 학습가이드와 온라인서비스도 지원되고 있습니다만 우리ITExamDump는 이미 이러한 사이트를 뛰어넘은 실력으로 업계에서는 우리만의 이미지를 지키고 있습니다. 우리는 정확한 문제와답만 제공하고 또한 그 어느 사이트보다도 빠른 업데이트로 여러분의 인증시험을 안전하게 패스하도록합니다.Microsoft 070-659인증시험을 응시하려는 분들은 저희 문제와 답으로 안심하시고 자신 있게 응시하시면 됩니다. 우리ITExamDump 는 여러분이 100%Microsoft 070-659인증시험을 패스할 수 있다는 것을 보장합니다.
시험 번호/코드: 070-659
시험 이름: Microsoft (TS: Windows Server 2008 R2, Server Virtualization)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 145 문항
업데이트: 2013-10-28
Microsoft인증 070-659시험을 패스하는 지름길은ITExamDump에서 연구제작한 Microsoft 인증070-659시험대비 덤프를 마련하여 충분한 시험준비를 하는것입니다. 덤프는 Microsoft 인증070-659시험의 모든 범위가 포함되어 있어 시험적중율이 높습니다. Microsoft 인증070-659시험패는 바로 눈앞에 있습니다. 링크를 클릭하시고ITExamDump의Microsoft 인증070-659시험대비 덤프를 장바구니에 담고 결제마친후 덤프를 받아 공부하는것입니다.
ITExamDump는 IT인증관련덤프를 제공하는 최고의 업체입니다, 덤프들은 ITExamDump의 베터랑의 전문가들이 오랜 풍부한 경험과 IT지식으로 만들어낸 최고의 제품입니다. 그리고 우리는 온라인무료 서비스도 제공되어 제일 빠른 시간에 소통 상담이 가능합니다.
목표를 이루는 방법은 여러가지가 있는데 어느 방법을 선택하면 가장 빨리 목표를 이룰수 있을가요? Microsoft인증 070-659시험을 패스하는 길에는ITExamDump의Microsoft인증 070-659덤프를 공부하는 것이 가장 좋은 방법이라는것을 굳게 약속드립니다. ITExamDump의Microsoft인증 070-659덤프는 시험문제에 초점을 두어 제작된 공부자료이기에Microsoft인증 070-659패스를 가장 빠른 시일내에 한방에 할수 있도록 도와드립니다.
070-659 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-659.html
NO.1 You use Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 to manage your
Hyper-Venvironment.
The finance department uses a legacy application that is not supported on Windows Server 2008 R2. The
application runs on a server that has the following configuration:
- Windows 2000 Server operating system
- One 10GB hard disk, FAT formatted
- 512 MB of RAM
You need to ensure that you can perform a physical-to-virtual (P2V) conversion of the server.
What should you do?
A. Run the convert c: /FS: NTFS command on the server.
B. Use offline P2V.
C. Increase the server's RAM to at least 1024 MB.
D. Use online P2V.
Answer: B
Microsoft자료 070-659 070-659 070-659 dumps
NO.2 You use Hyper-V server 2008 R2 and failover clustering to host several virtual machines (VMs).
You plan to perform a Volume Shadow Copy (VSS) backup of a Cluster Shared Volume (CSV).
You need to ensure that resources can continue to use the CSV during the VSS backup.
What should you do?
A. Turn on maintenance mode for the CSV.
B. Configure your VSS-aware backup utility as a generic application in failover clustering.
C. Use Failover Cluster Manager to remove dependences from your disk resources.
D. Turn on redirected access for the CSV.
Answer: D
Microsoft dump 070-659 070-659 pdf 070-659자격증 070-659 070-659자격증
NO.3 You have a stand-alone server named SERVER01 that runs Windows Server 2008 R2 Enterprise with
service Pack l and Hyper-V. The server hosts 12 virtual machines (VMs). You add Hyper-V on a new
server named SERVER02. SERVER02 runs Windows Server 2008 R2 Enterprise. One of the VMs on
SERVER01 is configured to use dynamic memory. You export the VM.
The VM cannot be imported on SERVER02. You prepare to export the VM again.
You need to ensure that the exported VM can be imported on SERVER02.
What should you do?
A. Remove all DVD drive media from the VM.
B. Configure the VM to use static memory.
C. Start the VM and allow it to run.
D. Start and then pause the VM.
Answer: B
Microsoft dump 070-659인증 070-659 070-659 070-659
NO.4 A company has a Hyper-V server named SERVER01 that runs Windows Server 2008 R2 Enterprise
with Service Pack (SP) 1. All virtual machines (VMs) run Windows Server 2008 R2 Enterprise with SP1.
All VMs are configured to use Dynamic Memory.
A VM named VM01 is exhibiting performance problems.
You need to ascertain how much memory VM01 is consuming.
What should you do?
A. Use Performance Monitor to view the \Hyper-V Dynamic Memory Balancer\Available Memory
performance counter for SERVER01.
B. Use Performance Monitor to view the \Hyper-V Dynamic Memory VM\Guest Visible Dynamic Memory
performance counter for VM01.
C. In the VM settings, view the Maximum RAM value.
D. Use Performance Monitor to view the \Hyper-V Dynamic Memory VM\Physical Memory performance
counter for VM01.
Answer: A
Microsoft 070-659인증 070-659
NO.5 Your company has an Active Directory Domain Services (AD DS) domain that includes an AD security
group named Development.
You have a member server that runs Windows Server 2008 R2 with the Hyper-V role installed.
You need to ensure that Development group members can only manage virtual machines (VMs).
Development group members must not have administrative privileges on the host server.
What should you use.?
A. Authorization Manager
B. the net localgroup command
C. Local Users and Groups
D. Active Directory Administrative Center
Answer: A
Microsoft pdf 070-659 070-659자격증 070-659 dumps 070-659 dumps
NO.6 You manage Hyper-V host servers and virtual machines (VMs) by using Microsoft System Center Virtual
Machine Manager (VMM) 2008 R2. You grant a user the Delegated Administrator user role.
You need to provide the user with the ability to manage VMs through the VMM Self-Service Portal.
What should you do?
A. In VMM, grant the user the Administrator user role.
B. In VMM, grant the user the Self-Service user role.
C. Enable the Single sign-on for Terminal Services option for the VMM Self-Service Portal.
D. Enable the Integrated Windows Authentication option for the VMM Self-Service Portal.
Answer: B
Microsoft인증 070-659 070-659 dump 070-659
NO.7 You use Hyper-V Server 2008 R2 and failover clustering to host several virtual machines (VMs).
You need to place a disk in maintenance mode.
Which Windows PowerShell cmdlet should you run?
A. Suspend-ClusterResource
B. Stop-ClusterResource
C. Set-ClusterResourceDependency
D. Block- ClusterAccess
Answer: A
Microsoft 070-659최신덤프 070-659인증 070-659기출문제 070-659
NO.8 A company has a Windows Hyper-V Server 2008 R2 failover cluster.
You need to perform a configuration-only export of a virtual machine (VM).
What should you do?
A. In Hyper-V Manager, right-click the VM and select Export.
B. In Hyper-V Manager, rename the VM.
C. Create a custom .exp file with the VM name.
D. Create a PowerShell script that uses the Hyper-V API.
Answer: D
Microsoft 070-659최신덤프 070-659 070-659
NO.9 A company uses Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 to manage their
Hyper-V environment.
A VMM hardware profile is required for the new SQL Server 2008 R2 Enterprise VMs. Based on company
policy, VMs running SQL Server 2008 R2 Enterprise must use Dynamic Memory and the memory
allocation for the VMs must be set to high.
You need to configure a VMM hardware profile so that the memory allocation priority is set to high.
How should you configure the hardware profile? (To answer, select the appropriate node in the answer
area.)
Answer:
NO.10 You are configuring a Windows Server 2008 R2 Hyper-V server.
You need to audit changes to Hyper-V roles and authorization rights.
Which file should you audit?
A. AzMan.msc
B. web.config
C. InitialStore.xml
D. machine.config
Answer: C
Microsoft인증 070-659 070-659 dump
NO.11 A company has virtual machine (VMs) running in a 16-node Hyper-V cluster. They are using Microsoft
System Center Virtual Machine Manager (VMM) 2008 R2 to migrate all of their existing VMware VMs to
Hyper-V.
You need to configure VMM to ensure that it places VMs on each host until each host is fully utilized.
What should you do?
A. Configure placement settings for resource maximization.
B. Prioritize resources for memory free.
C. Prioritize resources for disk I/O.
D. Prioritize resources for network utilization.
E. Configure placement settings for load balancing.
Answer: AE
Microsoft자격증 070-659 070-659 070-659
NO.12 Your environment includes Hyper-V and VMware ESX. You manage your virtual environment by using
Microsoft System Center Virtual Machine manager (VMM) 2008 R2.
You plan to perform a virtual-to-virtual (V2V) conversion of a virtual machine (VM) that is located on the
ESX server.
You start the conversion by using the Convert Virtual Machine Wizard.
Communication between the destination host and the ESX server fails, and the conversion does not finish
successfully.
You need to ensure that the conversion finishes successfully.
What should you change?
A. WSMan permissions and settings
B. Windows Firewall exceptions for Background Intelligent Transfer Service (BITS)
C. Secure Shell (SSH) and HTTPS settings
D. Server Message Block (SMB) settings
Answer: C
Microsoft기출문제 070-659 070-659 070-659
NO.13 You are configuring a virtual environment. The environment includes servers that run either Windows
Server 2003 or Windows Server 2008 R2. You manage the environment by using Microsoft System
Center Virtual Machine Manager (VMM) 2008 R2.
The servers that run Windows Server 2003 do not meet the system requirements to run Windows Server
2008 R2 or Microsoft Hyper-V Server 2008 R2.
You want to host non-production virtual machines (VMS) on the Windows Server 2003 servers.
You need to be able to manage the Windows Server 2003 servers by using VMM.
What should you do?
A. Install Virtual Machine Remote Control Client Plus (VMRCplus) on the Windows Server 2003 host
servers.
B. Stage the Microsoft Virtual Server 2005 R2 software on the VMM server.
C. Stage the Microsoft Virtual Server 2005 software on the VMM server.
D. Add the Windows Server 2003 host servers to VMM by using the Add Hosts wizard.
Answer: D
Microsoft dump 070-659 070-659 dump 070-659자격증 070-659
NO.14 You use Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 to manage your Hyper-V
environment.
Failures occur when you perform offline physical-to-virtual (P2V) conversions by using VMM.
You need to ensure that you have the information that is necessary to troubleshoot the problem.
What should you do?
A. Create the x:\Windows\inf\setupapi.dev.log file in Windows PE.
B. Create the scvmm_winpe.etl file on the root of the source computers boot volume
C. Create the scvmm_winpe_setupapi.log file on the root of the source computers boot volume
D. Create the scvmm_enable_winpe_tracing.txt file on the root of the source computers boot volume
Answer: D
Microsoft덤프 070-659 070-659인증 070-659 dump
NO.15 A company has a 64-bit server with a quad-core processor. The server runs Windows Hyper-v Server
2008 R2 Service pack(SP) 1. The server will host five virtual machines (VMs) with SP1 integration
services installed. VM1, VM2, and VM3 use the maximum number of logical processors. Resources
allocation for VMs is configured as shown in the following table.
The environment must be configured to meet the following resource allocation requirements:
- VM4 must be able to consume up to half of each processor
- VM5 must not start if VM1, VM2, VM3, and VM4 are running.
- VM4 must use the maximum number of logical processors available on the Hyper-V host
- VM4 must share CPU resources evenly with VM3 during peak usage on the Hyper-V host
You need to configure VM4 to meet the requirements.
How should you configure VM4? (To answer, drag the approbate setting from the list of choices to the
correct locations in the answer area.)
Answer:
NO.16 A company has a server that runs Microsoft System Center Virtual Machine Manager (VMM) 2008 R2
with Service Pack (SP) 1 and Windows Server 2008 R2 Enterprise with Hyper-V.
The company is preparing to deploy virtual machines (VMs) from templates and has the following
requirements:
- The templates must be created from virtual hard disks (VHDs).
- The templates must include Windows 7.
- An out of the box experience (OOBE) must be provided for all guest operating systems that are
deployed from the templates.
You need to create a template that meets the company requirements.
Which three actions should you perform in sequence? (To answer, move the appropriate actions from the
list of actions to the answer area and arrange them in the correct order.)
Answer:
NO.17 You manage your Hyper-V environment by using Microsoft System Center Virtual Machine Manager
(VMM) 2008 R2.
You plan to perform a virtual-to-virtual (V2V) conversion of several virtual machines (VMs).
In VMM, you need to configure the default placement options to consolidate the VMs on the fewest
possible host servers.
What should you do?
A. In the Convert Virtual Machine (V2V) Wizard, set the placement goal to Resource maximization.
B. In Administration view, set the placement goal to Resource maximization.
C. In Administration view, set the placement goal to Load balancing.
D. In the Convert virtual Machine (V2V) Wizard, set the placement goal to Load balancing.
Answer: B
Microsoft pdf 070-659기출문제 070-659 dump
NO.18 You manage your virtual environment by using Microsoft System Center Virtual Machine Manager
(VMM) 2008 R2. You monitor the environment by using Microsoft System Center Operations Manager
2007 R2.
You need to enable automatic migration between Hyper-V host servers.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create a host group and add the host servers to it.
B. Configure reserve resources on each host server.
C. Use Intelligent Placement to place VMs on the host servers that have the highest rating.
D. Configure Performance and Resource Optimization (PRO) Tips.
Answer: CD
Microsoft pdf 070-659자료 070-659 070-659
NO.19 A company's virtualization environment contains servers that run Windows Server 2008 R2 with
Hyper-V and other servers that run VMware. You manage the Hyper-V environment by using Microsoft
System Center Virtual Machine Manager (VMM) 2008 R2 SP1. You manage the VMware vSphere 4
environment by using VMware vCenter.
You need to manage the VMware hosts by using VMM.
What should you do?
A. Add the vCenter server to VMM.
B. Move the VMware host to a host group.
C. Add a Library Server to VMM.
D. Perform a virtual-to-virtual (V2V) migration of the VMware VMs
Answer: A
Microsoft인증 070-659 dump 070-659 pdf 070-659
NO.20 A company has a physical Windows 2008 R2 Server that they plan to migrate to a virtual machine
(VM).
You need to document the migration process.
How should you complete the diagram? (To answer drag the appropriate answers from th elist of answer
choices to the correct locations in the diagram (answer area).
Answer:
ITexamdump의 00M-503덤프의 VCE테스트프로그램과 000-283덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-585시험에 대비한 고품질 덤프와 HP2-N35시험 최신버전덤프를 제공해드립니다. 최고품질 EX0-118시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기