IT인증시험은 국제적으로 인정받는 자격증을 취득하는 과정이라 난이도가 아주 높습니다. IBM인증 000-550시험은 IT인증자격증을 취득하는 시험과목입니다.어떻게 하면 난이도가 높아 도전할 자신이 없는 자격증을 한방에 취득할수 있을가요? 그 답은ITExamDump에서 찾을볼수 있습니다. ITExamDump에서는 모든 IT인증시험에 대비한 고품질 시험공부가이드를 제공해드립니다. ITExamDump에서 연구제작한 IBM인증 000-550덤프로IBM인증 000-550시험을 준비해보세요. 시험패스가 한결 편해집니다.
수많은IBM인증 000-550시험공부자료중에서ITExamDump의IBM인증 000-550덤프가 가장 출중한 원인은 무엇일가요? ITExamDump의IBM인증 000-550덤프는 실제시험문제의 출제방향을 연구하여 IT전문가로 되어있는 덤프제작팀이 만든 최신버전 덤프입니다. ITExamDump의IBM인증 000-550덤프가 있으면 힘든IBM인증 000-550시험이 쉬어져서 자격증을 제일 빠른 시간내에 취득할수 있습니다.제일 어려운 시험을 제일 간단한 방법으로 패스하는 방법은ITExamDump의IBM인증 000-550덤프로 시험준비 공부를 하는것입니다.
많은 시간과 돈이 필요 없습니다. 30분이란 특별학습가이드로 여러분은IBM 000-550인증시험을 한번에 통과할 수 있습니다, ITExamDump에서IBM 000-550시험자료의 문제와 답이 실제시험의 문제와 답과 아주 비슷한 덤프만 제공합니다.
멋진 IT전문가로 거듭나는 것이 꿈이라구요? 국제적으로 승인받는 IT인증시험에 도전하여 자격증을 취득해보세요. IT전문가로 되는 꿈에 더 가까이 갈수 있습니다. IBM인증 000-550시험이 어렵다고 알려져있는건 사실입니다. 하지만ITExamDump의IBM인증 000-550덤프로 시험준비공부를 하시면 어려운 시험도 간단하게 패스할수 있는것도 부정할수 없는 사실입니다. ITExamDump의IBM인증 000-550덤프는 실제시험문제의 출제방형을 철저하게 연구해낸 말 그대로 시험대비공부자료입니다. 덤프에 있는 내용만 마스터하시면 시험패스는 물론 멋진 IT전문가로 거듭날수 있습니다.
시험 번호/코드: 000-550
시험 이름: IBM (IBM solidDB and IBM solidDB Universal Cache)
발달한 네트웨크 시대에 인터넷에 검색하면 많은IBM인증 000-550시험공부자료가 검색되어 어느 자료로 시험준비를 해야 할지 망서이게 됩니다. 이 글을 보는 순간 다른 공부자료는 잊고ITExamDump의IBM인증 000-550시험준비 덤프를 주목하세요. 최강 IT전문가팀이 가장 최근의IBM인증 000-550 실제시험 문제를 연구하여 만든IBM인증 000-550덤프는 기출문제와 예상문제의 모음 공부자료입니다. ITExamDump의IBM인증 000-550덤프만 공부하면 시험패스의 높은 산을 넘을수 있습니다.
000-550 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-550.html
NO.1 How many different installations of solidDB binaries can exist on the same host?
A. one
B. as many as can fit
C. one per release of solidDB
D. one per version of solidDB
Answer: B
IBM 000-550자격증 000-550 000-550
NO.2 To set up solidDB in a standalone, HotStandby or Universal Cache configuration, where can the
configuration be performed?
A. The configuration is performed from the command line using the solid command with suitable
option settings and values.
B. The configuration needs to be set in a solid.ini file.
C. The configurations can be set up by using the solsql tool and the operating system services file.
D. The standalone configuration is set in the solid.ini file while the HotStandby and Universal
Cache configuration is set using the sqlcon tool.
Answer: B
IBM 000-550자료 000-550 000-550
NO.3 To administer a HotStandby database you need which privilege?
A. Sys_Sync_Admin_Role
B. Sys_Console_Role
C. Sys_Hotstandby_Role
D. Sys_Replication_Role
Answer: B
IBM 000-550 pdf 000-550 dumps 000-550 000-550 dump
NO.4 To execute the admin command "status", what is the correct syntax?
A. solsql -e "COMMAND 'status' " "tcp 1313" dba dba
B. solsql -f "ADMIN STATUS 'status' " "tcp 1313" dba dba
C. solcon "status" "tcp 1313" dba dba
D. solcon -e "status" "tcp 1313" dba dba
Answer: D
IBM dumps 000-550 dumps 000-550 dump 000-550최신덤프
NO.5 Which software components must be installed to deploy IBM solidDB Universal Cache and provide
access to data residing in an IBM DB2 database?
A. IBM solidDB, IBM InfoSphere CDC for solidDB, IBM DB2, IBM InfoSphere CDC for DB2, IBM
InfoSphere CDC Access Server, and IBM InfoSphere CDC Management Console
B. IBM solidDB, IBM DB2, IBM Universal Cache for DB2,IBM InfoSphere CDC Replication Center,
and IBM InfoSphere CDC Management Console
C. IBM solidDB, IBM InfoSphere CDC for solidDB, IBM DB2, IBM InfoSphere CDC Access Server,
and IBM InfoSphere CDC Management Console
D. IBM solidDB, IBM InfoSphere CDC for solidDB, IBM DB2, IBM InfoSphere CDC for DB2, IBM
InfoSphere CDC Replication Center, and IBM InfoSphere CDC Management Console
Answer: A
IBM 000-550최신덤프 000-550 000-550 000-550최신덤프 000-550덤프
NO.6 What is the correct setup topology when deploying IBM solidDB Universal Cache in conjunction
with IBM solidDB High Availability (HotStandby) functionality?
A. CDC for solidDB instances are running on both the Primary node and on the Secondary node,
each CDC instance locally connecting to one solidDB server.
B. CDC for solidDB instance is running on the back-end node, remotely connecting to both
Primary and Secondary solidDB servers.
C. CDC for solidDB instance is running on the back-end node, remotely connecting to the Primary
server. Connection to the Secondary server is managed using Advanced Replication.
D. CDC for solidDB instance is running on the Primary node, locally connecting to the Primary
server. Connection to the Secondary server is managed by transparent failover.
Answer: B
IBM기출문제 000-550시험문제 000-550 000-550 000-550 pdf
NO.7 Which statement regarding IBM solidDB Netbackup is true?
A. One IBM solidDB Netbackup Server can only serve one backup source server.
B. The command ADMIN COMMAND 'netbackup' is supported within the [Srv]At configuration
parameter.
C. NetBackup copies logical database consisting of multiple files to one flat file to the
NetBackupDirectory by default.
D. If the specified remote directory does not exist, it is not created automatically by the solidDB
Netbackup Server.
Answer: C
IBM 000-550 dump 000-550 000-550최신덤프
NO.8 What are two methods for generating a trace file containing database statement executions
occurring in the solidDB server? (Choose two.)
A. Enable SQL tracing within the solidDB server.
B. Enable ODBC tracing within the solidDB ODBC driver.
C. Enable ODBC tracing within the ODBC Driver Manager.
D. Enable JDBC tracing within the solidDB JDBC driver.
E. Enable JDBC tracing within the JDBC Driver Manager.
Answer: A,C
IBM인증 000-550 000-550덤프
NO.9 A solidDB disk-based database instance has been optimally running for six months and starts to
experience major degradation in performance. Upon executing an overall DB status report using ADMIN
COMMAND "status", it is noted that the value for index writes after last merge is at
20945876. Why would this be a probable cause of the performance degradation?
A. A large value for this counter signifies that the creation of indices, after a large batch insert
process, has been halted leading to excessive memory usage which can cause serious
performance issues.
B. A large value for this counter signifies that a large number of transactions are being
checkpointed which can cause serious performance issues.
C. A large value for this counter signifies that the multi-versioning storage tree is not being flushed
to disk due to a long running transaction which can cause serious performance issues.
D. A large value for this counter signifies that a transaction performing a merge-join is utilizing a
large amount of memory causing potential process paging/swapping leading to serious
performance issues.
Answer: C
IBM덤프 000-550인증 000-550덤프 000-550 000-550 pdf
NO.10 It is possible when using solsql to run scripts either interactively or nested within another script.
Which special character is used to identify that you want to execute a script file?
A. &
B. @
C. #
D. !
Answer: B
IBM 000-550 pdf 000-550 000-550
NO.11 What are two possible reasons for high latency between a solidDB in-memory cache and a back-end
database? (Choose two.)
A. Insufficient network bandwidth for the volume of transactions that are being processed.
B. The network connection between the solidDB in-memory cache and the back-end database is
down.
C. There is database lock contention on the target database.
D. The CDC instances are stopped.
E. Table mappings are not configured properly.
Answer: A,C
IBM자격증 000-550자료 000-550 000-550기출문제
NO.12 You have setup solidDB Universal Cache such that you have a table DBA.ORG in the solidDB
front-end, being mirrored to a back-end database. After some time, you notice that the
subscription is Inactive and you try to start Mirroring (Continuous). The subscription state remains
Inactive and the Event Log shows that the structure of table DBA.ORG has changed. What is the
recommended course of action?
A. In solidDB, drop the ORG table and recreate it; then restart the subscription.
B. In the backend database, drop the ORG table and recreate it; then restart the subscription.
C. In solidDB, change the table definition to what it was previously; then restart the subscription.
D. In the Management Console, use the 'Update table definition' option, for the source in the Table
Mappings area; then restart the subscription.
Answer: D
IBM덤프 000-550자료 000-550
NO.13 To set the transaction log retention space size for solidDB Universal Cache in the solidDB
configuration file (solid.ini), which parameter is used?
A. [LogReader]
MaxLogSize
B. [Com]
ReadBufSize
C. [Hotstandby]
MaxMemLogSize
D. [indexFile]
CacheSize
Answer: A
IBM 000-550 000-550자료 000-550인증
NO.14 When setting the [HotStandby]SafenessLevel = Auto, which two statements are true about
transaction durability and HotStandby safeness level? (Choose two.)
A. SafenessLevel switches to 1-safe when using [Logging]DurabilityLevel = 1(Relaxed).
B. SafenessLevel switches to 2-safe when using [Loggng]DurabilityLevel = 2(Adaptive).
C. SafenessLevel switches to 1-safe when using [Logging]DurabilityLevel = 3(Strict).
D. SafenessLevel switches to 2-safe when using [Logging]DurabiltyLevel = 4(Custom).
E. SafenessLevel switches to 1-safe when using [Logging]DurabiltyLevel = 2(Adaptive).
Answer: A,B
IBM최신덤프 000-550 000-550 000-550 pdf
NO.15 What are two effective ways to increase the throughput of replication between the solidDB in-
memory cache and a back-end database? (Choose two.)
A. Add a summarization column to the source.
B. Use multiple subscriptions instead of just one.
C. Update the mirror_commit_after_max_transactions parameter to a higher value.
D. Ensure that the conflict resolution mechanism is set to "source".
E. Use only the Mirror (Continuous) form of replication.
Answer: B,C
IBM시험문제 000-550 000-550인증 000-550시험문제
NO.16 What are two possible conflict resolution methods between solidDB and a back-end database?
(Choose two.)
A. Source wins
B. Reference
C. Trigger
D. UserExit
E. Alert user
Answer: A,D
IBM 000-550기출문제 000-550자료 000-550자료 000-550덤프
NO.17 Click the Exhibit button.
In the exhibit, what does the attached replication diagram show?
A. All subscriptions are Mirroring Continuous.
B. The subscription FERO_BERW is Inactive.
C. The subscription FERO_BERW is Mirroring Continuous.
D. All subscriptions are using bidirectional Mirroring Continuous.
Answer: C
IBM덤프 000-550 000-550
NO.18 To execute the HotStandby administrative commands, which type of access privilege would be
needed?
A. SYS_ADMIN_SYNC_ROLE
B. SYNC_ADMIN_ROLE
C. ADMIN_CONSOLE_ROLE
D. SYS_CONSOLE_ROLE
Answer: D
IBM pdf 000-550 000-550덤프 000-550기출문제 000-550기출문제
NO.19 After completing the upgrade of the Primary server while performing a cold HSB-incompatible
upgrade, what is the correct sequence of steps to upgrade to the Secondary server?
A. Upgrade both servers; start and verify that the upgraded Primary server is in a PRIMARY
ALONE state; start the Secondary server and verify that it is in a SECONDARY ACTIVE state;
perform a 'hsb connect' command to resynchronize the servers and restore to normal operation.
B. Upgrade both servers; start and verify that the upgrade Primary server is in a PRIMARY
ALONE state; start the Secondary server and verify that it is in a SECONDARY ACTIVE state;
perform a 'hsb netcopy' command followed by 'hsb connect' to resynchronize the servers and
restore to normal operation.
C. Upgrade both servers; start and verify that the upgraded Primary server is in a PRIMARY
ACTIVE state; start the Secondary server and verify that it is in a SECONDARY ALONE state;
perform a 'hsb connect' command to resynchronize the servers and restore to normal operation.
D. Upgrade both servers; start and verify that the upgraded Primary server is in a PRIMARY
ALONE state; start the Secondary server and verify that it is in a SECONDARY ALONE state;
perform a 'hsb netcopy' command followed by 'hsb connect' to resynchronize the servers and
restore to normal operation.
Answer: D
IBM덤프 000-550 000-550 000-550인증
NO.20 Which two are directly visible in solidDB server-side SQL Tracing? (Choose two.)
A. longest lasting statements in duration order
B. timestamps of statement preparation
C. timestamps of individual fetch operations
D. timestamps of individual rpc_session operations.
E. list of statements currently under execution
Answer: B,C
IBM시험문제 000-550 000-550 dump
IT인증시험이 다가오는데 어느 부분부터 공부해야 할지 망설이고 있다구요? 가장 간편하고 시간을 절약하며 한방에 자격증을 취득할수 있는 최고의 방법을 추천해드립니다. 바로 우리ITExamDump IT인증덤프제공사이트입니다. ITExamDump는 고품질 고적중율을 취지로 하여 여러분들인 한방에 시험에서 패스하도록 최선을 다하고 있습니다. IBM인증000-550시험준비중이신 분들은ITExamDump 에서 출시한IBM인증000-550 덤프를 선택하세요.
댓글 없음:
댓글 쓰기